Anti-Scratch Dual Bed Cleaner and Print Remover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, elegant way to remove those stuck prints, and pieces of melted filament without scratching your base-plate/bed
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 238
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
About this model:
Many people market their print removal tools as: “Scrapers” which implies that it could cause damage to the bed, and… Scrape it.
I decided to make a scratch-free scraper, with two easy to use “scraping sides”.
Print Time:
Quick print, 35 min at 100mm/s.
Print Settings:
Filament:
Any solid filament. (PLA, PETG, ABS, ASA, Polycarbonate, Etc.)
Supports:
None!
Rafts:
None!
Temperature:
Whatever matches your filament.
Infill:
Anything above 15% should work.
Layer Height:
0.2mm for medium quality, less effective.
Lower layer height will help it remove prints more effectively.
(Rendered images are there to give you an idea of the final result in perfect conditions, your prints may vary in quality.)
Feel free to remix, edit, and sell my design!
If you like it, please click Like, and Comment on it, about what I can improve on in future designs!