1 / 3
garage door holder for Aqara Door and window sensor — zdjęcie 1
1 / 3

garage door holder for Aqara Door and window sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hinged holder for the Aqara door and window sensor to be used on garage door or other horizontally opening thing

Ocena
4,667 / 5
Polubienia
17
Pobrania
104
Wydruki
2
Wyświetlenia
683
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is my version of a hinged holder for the Aqara door and window sensor to be mounted on a garage door.
It uses a piece of 1.75mm filament as hinge pin.

I made the clearances fairly large to ensure easy swing since the magnet is quite light.
Attach to garage door with double sided tape.
 

Fusion and STEP files are also in the file section for easy remix.

Print instructions:

It is designed to be printed with 0.4mm nozzle and 0.3mm layers. 
To get a little more weight on the magnet side print that part with additional top and bottom layers and a high infill density. 

Tagi