Child lock compatible with Bosch Stove
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Click child lock. V1
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a child lock for Bosch electric stoves where you have screw holes for the original part number: 00627547 627547
You need a filament that is at least capable of sustained 60°C.
I printed mine in ABS. FULL infill. 0.2 or 0.24 layer hight. One is not sufficient you need both sides. Screw is at least DIN7981F 3.5x9 Maximum 12mm in length.
There should be screw holes left and right under the front panel.
Better use Something better like PAHT-CF or Annealed PA12-CF or ASA-CF.
Print, install and use at your own risk. It's neither tested in a long term, nor can I guarantee that it will work for your case.
I will eventually upload a sturdier version.
Once you put the Lock through the colder the click layer should break and then it works.
Yes, I cleaned the stove after installing, the close ups didn't do it good :D