Step Stool Holder for Harbor Freight Franklin Two-Step
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall holder for the two-step ladder from Harbor Freight. Any 7/8" tube with 2" radius should work. Fusion360 included.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall holder for any step stool made with 7/8" tube and 2" radius bend. This specific ladder requires a 21mm offset from wall to hang flat.
Advantages:
- One handed operation since the center is free. Doesn't interfere with the grip.
- Self-centers, easy to drop it off without paying attention.
I modeled it for the steel two-step stepladder from harbor freight:
https://www.harborfreight.com/two-step-steel-stool-56760.html
This was modeled from scratch using this design from Glen: https://www.printables.com/model/1125080-step-stool-wall-mount
I found it a bit hard to edit his file, so used his method to create one from scratch that should be a little easier to remix.
This was modeled to use spax countersunk #8 1-¼" screws that protrude ½" from model. These settings are setup as user parameters, but you'll want to do a test print. Due to head geometry, I was about 1.5mm off desired depth first attempt.
I printed 4 perimeters and 15% grid infill with PLA.