Step Stool Holder for Harbor Freight Franklin Two-Step
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall holder for the two-step ladder from Harbor Freight. Any 7/8" tube with 2" radius should work. Fusion360 included.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 24
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall holder for any step stool made with 7/8" tube and 2" radius bend. This specific ladder requires a 21mm offset from wall to hang flat.
Advantages:
- One handed operation since the center is free. Doesn't interfere with the grip.
- Self-centers, easy to drop it off without paying attention.
I modeled it for the steel two-step stepladder from harbor freight:
https://www.harborfreight.com/two-step-steel-stool-56760.html
This was modeled from scratch using this design from Glen: https://www.printables.com/model/1125080-step-stool-wall-mount
I found it a bit hard to edit his file, so used his method to create one from scratch that should be a little easier to remix.
This was modeled to use spax countersunk #8 1-¼" screws that protrude ½" from model. These settings are setup as user parameters, but you'll want to do a test print. Due to head geometry, I was about 1.5mm off desired depth first attempt.
I printed 4 perimeters and 15% grid infill with PLA.