Replacement Cups for Folding Grabber Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
to replace the hard rubber ones that break easily
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original hard rubber cups, with a plastic core for the screw, don't do a particularly good job and are also easily broken. The plastic core does, anyway. I modeled these up to print in TPU and they work great. I made mine a little thin and flexible because I use my grabbers to pick up slot cars that are out of reach. I've uploaded a few thickness options. Which works best will depend on your TPU and how much stiffness/strength you need.
These print with no supports needed as the cone is 45 degrees and there's a bridge at the top to support the screw hole.