MK4/MK4S Z Axis Dust Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have gotten a lot of dust and filament scraps down into the deep holes of the z axis motor holder on my MK4S and...
- Ocena
- 4,864 / 5
- Polubienia
- 195
- Pobrania
- 586
- Wydruki
- 25
- Wyświetlenia
- 2158
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have gotten a lot of dust and filament scraps down into the deep holes of the z axis motor holder on my MK4S and I wanted some way to stop it from happening. I searched around Printables and found quite a few that I liked, but I thought that I might as well design my own. So I got on FreeCAD made a model and did a draft print to see if it fit. It wasn't exactly what I wanted so I did some modifications to get to this. It fits into the hole and leaves plenty of room for the z screws to rotate.
Print Settings:
For the best quality, print it upside down with supports.
| Resolution : | 0.2 | Supports | YES |
| Infill : | 20% | Brim: | YES |
| Material: | PETG | Filament Color: | Orange |
More designs
