Transport / Display Case for Piantor (42 keys)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box for the Piantor keyboard, which doubles as a stand for storing / displaying the board when not in use.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Piantor Transport Box
Introduction
This is a 3D-printable box for the Piantor keyboard from Beekeeb: https://shop.beekeeb.com/product/piantor-keyboard-kit/
For the box to hold the boards snuggly, you need to use the following case:
https://www.printables.com/model/1181715-piantor-42-keys-keyboard-case
Stuff you need
- 3D printed parts
- 8x (you might get away with 4x) magnets (size 19mm x 9mm x 1.7mm)
I included the step files if you want to adapt the slots for other sizes of magnets.
Printing Instructions
The parts are quite easy to print. No supports are needed if you orient them correctly on the print bed (box opening pointing upwards).
I, by the way, used EIBOS Filament Silk Series (PLA) in Ti-Chromatic Gold-Blue-Fuchsia.
Mounting
After printing, glue the magnets into the slots with e.g. superglue. Be careful to orient the magnets correctly and let the glue harden before glueing the next one.
Make it your own
I included the STEP file. Feel free to modify the stand as you please.
If you have questions, remarks, suggestions, I would be happy to hear from you.