1 / 5
Accessories Holder for Bosch Unlimited Vacuum Cleaner — zdjęcie 1
1 / 5

Accessories Holder for Bosch Unlimited Vacuum Cleaner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An additional holder to hang Bosch Unlimited Vacuum cleaner accessories/brushes

Ocena
5 / 5
Polubienia
15
Pobrania
82
Wydruki
1
Wyświetlenia
496
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I recently bought a Bosch Unlimited 10 Vacuum Cleaner and even though it is delivered with 4 extra accessories, there is only one holder , allowing to put only 2 accessories on the rail. There is place for an extra holder on the other side so I modeled one and now it's great!

 

I believe accessories are compatible between some other versions of Bosch Unlimited Vacuum Cleaner so the same hook should work even if you don't have a version 10.

 

I created 2 versions, they are both derived from the same model, the part is sliced into 3 pieces for easier printing and better orientation for durability:

  • Screwed version, it requires 2 M3x40 screws and 2 M3 square nuts
  • Glued version, you just need to glue the part together (I did not print this version)

 

For print settings, I use usually PLA, 0,2 mm layer height (Speed profile on my MK3), 3 perimeters and 10% rectilinear infill. With this settings, the print time is 3hr30.

Tagi