1 / 2
Fujinon XF 56mm F/1.2 R Rugged Box — zdjęcie 1
1 / 2

Fujinon XF 56mm F/1.2 R Rugged Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Carrying case for the 56mm Fujinon XF F/1.2 lens with TPU inserts and no space for the included or any other lens hood.

Ocena
5 / 5
Polubienia
9
Pobrania
16
Wydruki
0
Wyświetlenia
129
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Everything is printable without supports, print the inserts out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches.

If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction to maybe 1.2mm or just use the box without the seal installed.

Thanks to @Whity for the parametric design of the rugged box I used and @Yanev for laying the groundwork before him.

I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness.