1 / 2
Fujinon XF 56mm F/1.2 R Rugged Box — image 1
1 / 2

Fujinon XF 56mm F/1.2 R Rugged Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Carrying case for the 56mm Fujinon XF F/1.2 lens with TPU inserts and no space for the included or any other lens hood.

Rating
5 / 5
Likes
9
Downloads
16
Makes
0
Views
129
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Everything is printable without supports, print the inserts out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches.

If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction to maybe 1.2mm or just use the box without the seal installed.

Thanks to @Whity for the parametric design of the rugged box I used and @Yanev for laying the groundwork before him.

I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness.