Qidi Plus 4 tool boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small accessory boxes to fill the free space at the Qidi Plus 4 door with an additional trash can.
- Ocena
- 5 / 5
- Polubienia
- 102
- Pobrania
- 444
- Wydruki
- 5
- Wyświetlenia
- 3105
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is enough space between the door and the Qidi Plus 4 heating platform to place handy boxes for accessories.
Very simple boxes with optional lids and a small trash can (perfect for the KAMP purge line).
I wanted to ensure that the vibration of the printer would not cause the boxes to move. For proper assembly, you need two legs which need to be pressed into the holes of the box. Place the box by the door, pressing it lightly until it clicks into place. If there were any problems with the attachment in your printer, you can modify the leg with the included FreeCAD file.
I recommend gluing the lids handles.
With the included FreeCAD file, the box can be customized to your needs.
Material (remember heated chamber): ASA/ABS, I printed mine in PETg, but I'm worried about whether it will flow.
Layer height: 0.2
Layer width: 0.55
No supports are needed.
I would appreciate any suggestions and comments.