Carrera RC Passion Impact 2.0 Replacment Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printable version of the Front Bumper for the Carrera RC Passion Impact 2.0. The Original Replacement part i
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a printable version of the Front Bumper for the Carrera RC Passion Impact 2.0. The Original Replacement part is 370411303.
I created this because the Front Bumper broke at the first run of the car, and I think if it is so breakable I'd need plenty of them, so I want to print it.
I had some carbon fiber rod from an old umbrella, so I wanted to use this in this design. The diameter of the rod was 3,2mm. The printed hole is a bit smaller, so you might need to drill that open a bit, or redesign the hole for your rod.
The holes for the front axis support rods are also intentionally left a bit small so that they can be drilled open to the right amount.
I also attatch the FreeCAD file so that you can modify to your own will. Unfortunately, the FreeCAD model is quite fragile, so changes easily break it.
Print:
Material: PETG
Nozzle: 0.4mm
Layerhight: 0.2mm
Printdirection: on the surface with the arrow
No Support needed in this print direction