Carrera RC Passion Impact 2.0 Replacment Bumper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a printable version of the Front Bumper for the Carrera RC Passion Impact 2.0. The Original Replacement part i
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
This is a printable version of the Front Bumper for the Carrera RC Passion Impact 2.0. The Original Replacement part is 370411303.
I created this because the Front Bumper broke at the first run of the car, and I think if it is so breakable I'd need plenty of them, so I want to print it.
I had some carbon fiber rod from an old umbrella, so I wanted to use this in this design. The diameter of the rod was 3,2mm. The printed hole is a bit smaller, so you might need to drill that open a bit, or redesign the hole for your rod.
The holes for the front axis support rods are also intentionally left a bit small so that they can be drilled open to the right amount.
I also attatch the FreeCAD file so that you can modify to your own will. Unfortunately, the FreeCAD model is quite fragile, so changes easily break it.
Print:
Material: PETG
Nozzle: 0.4mm
Layerhight: 0.2mm
Printdirection: on the surface with the arrow
No Support needed in this print direction