1 / 8
Tow rope pulley guides for cheap rigid casters — zdjęcie 1
1 / 8

Tow rope pulley guides for cheap rigid casters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Convert cheap off the self wheels and rigid casters into tow rope pulleys. Similar of this size are usually 💸💸💸.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

We made a diy tow rope for sledding/skiing/snowboarding in our backyard. Recently we upsized our rope from 3/4" to 1 1/8". The larger size required larger pulleys. Things started to get pricey scaling it up so went with hacking together off the shelf parts and 3d print mods to bring the cost down.  In the end the hacked together pulleys worked far better at a much lower price compared to the metal purpose made arborist pulleys we had been using. 

Basically the print helps cover half of a wheel hub for hardware purchased at Harbor Freight. When used as a pair on rigid casters you get a pulley that has enough area covered to prevent the rope from falling off the wheel. 

 

With the larger diameter wheel/pulley it creates a more forgiving bend radius for the rope. 

Parts used:

~$18 for a rigid caster https://www.harborfreight.com/material-handling/tires-casters/rigid-casters/10-inch-pneumatic-rigid-caster-38943.html 

~$15 for 13 in wheel https://www.harborfreight.com/material-handling/tires-casters/13-in-pneumatic-tire-with-white-hub-63058.html 

~$4 for ½" by 6" eye bolt https://www.homedepot.com/p/Everbilt-1-2-in-x-6-in-Zinc-Plated-Eye-Bolt-with-Nut-806766/204273491 

$1.40 stainless lock nut https://www.homedepot.com/p/Everbilt-1-2-in-13-Stainless-Steel-Nylon-Lock-Nut-800161/204604715 

Tagi