Liczymy pasujące modele…
Model of a classic wooden sled. You can use it as a gift for children or as a Christmas decoration. Kit card also included. The joints are tight and solid. Assembled model size approx: 13 x 5 x 4 cm Print settings: No special settings are…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
Foam Knife Sled This cutting sled guarantees a perfect right-angled cut. Designed for work on multilayer foam. It can be used for all 90° cuts, of course! Includes various viewing windows and a centering line. Designed and adapted to a…
Wydruk około 5,64 €–6,89 € nettoWstępna wycena jednego wariantu
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
This is a remix of xcnerd88's sledgefire shell. The barrels have been adjusted for a tighter dart fit, and the shell is tapered at the front for easier insertion. I have also added bars at the back to prevent pushing the darts too far…
The model is easy to print and easy to assemble. You will need: - the printed files - some glue - a piece of filament of the same color 1. Print the necessary models. 2. Glue the marked surfaces shown in the picture. Firstly fit the 2…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
My daughter find some lack of her Barbie's winter equipment ;) So I measured Barbie's body and prepare this sledge model. Very simple construction and easy to print but playful item :) Print your own! Print instructions Printer Brand:…
This handle was done by me to pull my sledge. The hole for the rope is 10 mm. Print instructions Should be printed with high infill to make it as strong as possible.
Rather than spend a bunch of money on Aluminum T-track for my table saw crosscut sleds, or my router table, I opted to cut my own tracks. I purchased some t slot bits online - https://www.amazon.com/gp/product/B08DCN3NBV/ that cut a…
Ergonomics design, with special holes for your rope / wire
It's hammer time. Simple, yet effective. It's a sledge hammer. Two-handed grip recommended. Two print profiles: 100% and 250%. In my test prints, printing it with the head on top printed a slightly cleaner version, but feel free to flip…
Duplo sledge great for snow riding or as a helicopter landing skids. Note: Lego tolerances are very precise and your printer may not meet them. Maybe you will have to fine tune the model in your slicer (scale/flow/...). I added a file for…
PETG Layer 0.2mm Perimeters 0.5 x 4 Infill 25% No supports
This is the original version, the version that doesn't need pipes for hardware is here: What would be the Achilles Heel of a Sledgefire? The long reload cycle perhaps. And to remedy this, in designing this monstrosity I have sacrificed…
I have not been particularly happy with the Zimaboard mounting options out there until finding @MartinRowan's excellent modular 1U system . This remix was done to suit my specific needs, but I feel that some may be of use & worth sharing.…
What would be the Achilles Heel of a Sledgefire? The long reload cycle perhaps. And to remedy this, in designing this monstrosity I have sacrificed everything: simplicity, optimal print orientations, even common sense. Still in terms of…
(EN) Sledge as decoration. Easy to assemble. (CZ) Sáňky jako dekorace. Složení je snadné.
Clips for the Cryptid Sledgefire. Now with improved mega clips. Recommended print settings: 2 walls 15% infill no supports. You might need to clean up some of the cam-track overhangs with a hobby knife.
This has been tested extensively and works wonderfully. My first post, hope you enjoy it!
I did some quick modelling while waiting for the JetKVM Kickstarter campaign to end. Using their provided JetKVM 3D Model , I designed this 1W little sled that will hopefully fit the real thing. It is compatible with MartinRowan's…
A chamfer sled, attaches to sole of plane with magnets. Easily adjustable with threaded knobs. To set the chamfer size turn the knobs toward one another or apart to adjust the gap. I used 8mm x 3mm magnets, mine press fit, but you may…
Printed at 30% infill witch seams to give it similar squish to stock
We created the TapeStack System for story cassettes and audio dramas to be stored appropriatly with a little fun factor, too. It is made for common cassettes of the 1980s with size 109,5 x 69 x 17mm If you are interested in all TapeStack…
A quick and dirty remix of the original to include enough space at the bottom for an 18650 battery holder. It could be glued in or for a more solid/"permanent" solution the zip-tie holes have also been moved so that they can still be…
An alternate Wishbone part for the Cryptid that uses an M3 x 16mm socket head screw. If you have a set of M3 screws and don't want to buy a pack of M6 grub screws you only need one of. Hardware: M3 x 16mm Socket head screw. Just screw the…
Absolutely awesome work from MartinRowan . I wanted to put my fiber optic modem on a sled. Used the provided blank sled .step file and made this sled. I'm including the first iteration I made and the final iteration. Initial: Full sled,…
I designed this Thing as a replacement for a missing Sim-Card Holder in a new "B-Ware" Thinpad Tablet where the sledge was missing. I dont know how to call it correctly but i think its clear what it is. You may need to sand it a bit,…
These sleds make use of the bottom mounting channel on the router and requires 2 screws (Philips Pan Head screw #6-32×3/16 according to Teltonika) for a secure mount. (This will mark your router as the screws tap into the channel) The…
Handles designed to be fitted to a cheap plastic sledge to make for even more snow time fun. Requires a couple of 3mm dia. bolts and nuts to afix
silly sledge v30 i guess, spent half a week prototyping the ejection but didnt get it to work, everything else dimensioned correctly works well, have fun! feel free to remix this again to get it to eject properly if you would like to ask…
🚀 Eggtimer Quantum Avionics Bays (1.59", 2.26", 4") – Modular 2S LiPo Sled System A clean, modular avionics bay system designed specifically for Eggtimer Quantum altimeters . These sleds are built for reliability, ease of assembly, and…
Some sledge accesories I made for my son when he was young (2 years old) so he had something better to hold on to and a back rest to sit up right. He still loves and uses it today after 2 years. There are no external tools required, the…
Be patient when inserting the magnets. Label them ahead of time and keep the stack away from the sled when inserting. I inserted one end and loaded from one side, but it did take a few tries. I highly recommend adding a warning for the…
Avionics sled for the Eggtimer Quark, screw switch, and battery to fit in a 29mm tube. Made for this battery: https://a.co/d/16TvsBP
Just a sled, print 2 and make a Pi sandwich. Just don't eat it.
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
Disclaimer I will start with a disclaimer that this model is by no means rigorously tested nor verified with Fjellpulken that it is ok and safe to use. But, it has made my life so much easier this winter so I figured I should share it. It…
Just a sled, print 2 and make a Pi sandwich. Just don't eat it.
Sled outer dimension fit standard Shapton sharpening base 216x70mm Sled inner dimension designed to fit 10k natural stone size 150x50x10mm https://www.amazon.com/dp/B07TJQNG1R?ref=ppx_yo2ov_dt_b_fed_asin_title
Printed with “Amazon Basics - 3D Printer TPU Plastic Filament, 1.75 mm, 1 kg Spool, Black” on a Bamboo Labs P1P with 25% infill. This is designed to fit two GensACE Bashing 3S1P 5000mAh (133mm x 25mm), which I found on Amazon. As you may…
I needed to install a couple of 2.5" SSDs in my Supermicro 6028R-E1CR24N server. The correct drive sled for the server is an MCP-220-00140-0B which goes for about $27 on eBay. So instead of buying 2 of those and being done, I spend a…
The most significant updates include: return spring around barrel: compression spring 20mm OD, 1,5mm wire diameter, 305mm long- shortened to about 170mm. shortening the return spring in combination with the modified pump block allow for…
silly sledge v30 i guess, spent half a week prototyping the ejection but didnt get it to work, everything else dimensioned correctly works well, have fun! feel free to remix this again to get it to eject properly if you would like to ask…
As requested this is a single shot sled version of my Lee Enfield Magazine. I have yet to test it at a range but using dummy rounds it will cycle perfectly. You have to press the magazine release when loading the magazine for the most…
I printed in PETG. A 0.2MM layer height leaves the top fairly rough, but it seems to feed well. I printed the sample in the picture with 15% infill and just 2 wall layers as a test. I'm planning to do another in 35-50% and 4 layers once I…
It's a sled/adaptor I put together to mount a Raspberry Pi Pico where an Arduino Uno would go.
Be patient when inserting the magnets. Label them ahead of time and keep the stack away from the sled when inserting. I inserted one end and loaded from one side, but it did take a few tries. I highly recommend adding a warning for the…
Summary 80mm snow wheels Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.28 Infill: 40-60% How I Designed This Step 1) find a model. Step 2) Make it to be your wheel…
Avionics sled for the Eggtimer Quark, screw switch, and battery to fit in a 29mm tube. Made for this battery: https://a.co/d/16TvsBP
A sled design to keep the Xerxes Pi in place when inside a rack cavity.
The ESP32 Mini Dock is a lightweight, secure, and practical solution designed to keep your development board in place during the prototyping phase. It prevents accidental shorts on your workbench and provides a stable base for connecting…
This is a single shot mod for the 6.5 carcano created using the 2 models listed below. https://www.thingiverse.com/thing:5766167/files https://www.thingiverse.com/thing:4714469
PMAG 10 7.62 AC - AICS Short Action single shot sled. Best way to install the sled into a magazine is to remove follower/spring/base plate, insert sled first then rest of the magazine parts.
This model is compatible with the lego system.
I built a Meshcore Node for my trailer and needed a battery sled, so I designed this. Printed with PETG since it will be outdoors and possibly in a warm environment in the summer. The ears fit 2.5mm or 3mm screws perfectly. The two…
Remixed mtsracer's "Bobsled 2 Man" file to be a monosled. We originally remixed this design to print our county's logo on and gift to a local returning Olympian for her achievement in the monosled competition. I made a non-logo version to…
Fractal Design R2 & R3 HDD Caddy/Sled - Remixed from cfelicio's version to included 2.5in drive mounting holes
The orange sled on my Nexus Pro X broke. I could not find one so i designed this one. It is printed in PETG with the hollow inside facing down, and using minimal supports. The design uses M3 bolts with nuts on the back side of the sled to…
🚀 Eggtimer Quantum Avionics Bays (1.59", 2.26", 4") – Modular 2S LiPo Sled System A clean, modular avionics bay system designed specifically for Eggtimer Quantum altimeters . These sleds are built for reliability, ease of assembly, and…
Sledge's hammer from siege. Would probably work best with a fine nozzle to get the hammer nubs to print better. I used a 0.4mm nozzle and it turned out decently. Download 2 of the head parts and one each for the shaft.
New to 3d Modeling will upload a picture once I have a chance to 3d print it. Please feel free to comment if you have an ideas on how to make it better. Modeled using Fusion 360 just got bored and wanted to try and design an important…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
This 4 part sledgehammer head was made as a prop for a youtube video. Printing: just print Assembly: Stick the pla2 part into the pla1 part. Then you can switch between the fakeplahead.stl part and the tpuhammer_tpu part. Video: (used at…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
After printing the super awesome labels from Xoggy, I needed to differentiate the drives a little further than SSD and HDD. I added labels for array drives, parity, appdata, cache and then a blank one. If you're adding a custom label to…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Blade guard for a table saw crosscut sled. The guard can be installed in either the long or short direction, depending on the blade size and height of the sled. Category: Parts
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
@akak_222591 saved me so much time with setting up my rack of pi 5's. I found that I still occasionally like to take the pi's out of the rack and mess with them on a bench using a usb-c adapter and display. I cut a piece out of the side…
This model is compatible with the lego system.
To create this router sled all you need is an aluminum profile (product id model in the profile label) cut it in half or any other size the idea is to end up with two aluminum profiles the same size and print the file two times (how ever…
This is a modified version of the sled created in the original model to hold a pi 5 that has an NVME hat on top. There are new mounting points on the sled since the hat uses the original locations and i duplicated the mounting points for…
My shop is pretty small, so I already ripped two (old) pants on the end of the sled because of a sharp edge. Because I am not always changing pants for the shop when I am just getting something real quick, I decided I needed a solution…
Simple mod for the HECATE that puts notches on the breach sled so it stays in both the closed and opened positions better.
This is an adaptation of the parametric drive holder that can accommodate two different types or sizes of drives (and any number of them) Default settings are for 1x 7.3mm thick 2.5" SSD, and 1x 26mm thick 3.5" HDD. Drive 1 must be the…
A fully parametric disk holding bracket/spacer configurable for any size and number of disks. Features a tool-less design with a retaining pin to hold the drives in place without screws, but screw holes are also provided if you need to…
I test printed this on an Ender 5 pro and Elegoo Neptune 3 pro. Both did great without the use of supports. Make sure your printer and sliced file are set up in a way so it can handle overhangs up to 70 degrees. I specifically designed it…
I uploaded the silhouette from the internet, uploaded into Tinkercad, and posted it here, Made as wall art, or any decoration. Hope you like! Consider following and joining my dog lover group, called “Dog Lover Prints” where we improve…
For “Top Down” Controller play… here is the Deer Lead for your “dear” loved one using the Xbox Controller to access the Left and Right Front Facing buttons from the top without blocking any of the other functions. Also for Single Hand…
This makes it possible to put the front on the case without having the drives accessible from the outside easily.
The handlebar broke some years ago. My father-in-law fixed it with some cooper wire but it´s not sturdy enough. So I tried to design a replacement. I used PETG filament with extra carbon fiber. Infill with gyroid structure at 12-15%.…
Printed with 20% infill, no support needed. It is recommended to insert the heavy nut as low as possible for stability and fix it with a melt gun as on picture. It is possible to adjust the stability by turning the rear part.
Description Merry Christmas to everyone, I decided to design a TMNT Christmas sled that delivers Pizza's for Christmas. The model does not include the mini figures, if you want to download them you can go to…
Introducing The Sledding Snowman! Usual settings should be fine to print this. NOTE: The scarf is a very small piece print it slowly and with good cooling.
modeled after an original BA23 drive sled, perfect for you to mount your RX50 or RX33 drives or ESDI or MFM drives in your MicroPDP11 or MicroVAX system
Just two otters on a sled with three gifts in the front, the front otter holding a present that's nearly falling out while tossing one hand in the air with abandon. The rear otter, larger, holds onto the first as well as clamping a…
Snap fit (slightly loose still) pi zero 1.3 sled. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: Amazon basics PLA Whiteish Notes: You can print…
For “Top Down” controller play….here is the Deer Sled for your “dear”, loved one using the PS3 Controller to access the L1, L2,R1 and R2 buttons from the top without blocking any analog functions. Press the “antler” Lever forward and it…
