iSpindel Sled for XL PET with battery holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and dirty remix of the original to include enough space at the bottom for an 18650 battery holder. It could be…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A quick and dirty remix of the original to include enough space at the bottom for an 18650 battery holder.
It could be glued in or for a more solid/"permanent" solution the zip-tie holes have also been moved so that they can still be used.
For me it was easier and safer to find a battery with no wires attached and instead use a holder. Hopefully it can come in handy to someone else.
(I will post some pictures once I manage to find time to take photos.)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Doesn't matter (I used 0,28)
Infill:
Due to the thin walls it doesn't matter
Notes:
Simple print, shouldn't cause much problem. Use a raft if you feel you need to (I did). The part around the battery should flex to conform to your PET preform.
Category: Electronics