iSpindel Sled for XL PET with battery holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick and dirty remix of the original to include enough space at the bottom for an 18650 battery holder. It could be…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 33
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A quick and dirty remix of the original to include enough space at the bottom for an 18650 battery holder.
It could be glued in or for a more solid/"permanent" solution the zip-tie holes have also been moved so that they can still be used.
For me it was easier and safer to find a battery with no wires attached and instead use a holder. Hopefully it can come in handy to someone else.
(I will post some pictures once I manage to find time to take photos.)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Doesn't matter (I used 0,28)
Infill:
Due to the thin walls it doesn't matter
Notes:
Simple print, shouldn't cause much problem. Use a raft if you feel you need to (I did). The part around the battery should flex to conform to your PET preform.
Category: Electronics
