Traxxas Sledge Battery Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this protection spacer to prevent the packs from wiggling around and getting damaged.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed with “Amazon Basics - 3D Printer TPU Plastic Filament, 1.75 mm, 1 kg Spool, Black” on a Bamboo Labs P1P with 25% infill.
This is designed to fit two GensACE Bashing 3S1P 5000mAh (133mm x 25mm), which I found on Amazon. As you may have noticed I do use the battery tray without the lid to also fit my DIY packs but I shortly tested it and it should fit even with the original lid. I will attach a photo as prove as soon as I need to disassemble the Sledge the next time.
Feel free to message me if your pack(s) have a different size and I will create a model for your size.
Have fun an may your battery packs stay safe! :)