Barbie's sledge sled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My daughter find some lack of her Barbie's winter equipment ;) So I measured Barbie's body and prepare this sledge…
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 245
- Wydruki
- 4
- Wyświetlenia
- 1139
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My daughter find some lack of her Barbie's winter equipment ;) So I measured Barbie's body and prepare this sledge model. Very simple construction and easy to print but playful item :) Print your own!
Print instructions
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0,15
Infill:
0%
Filament:
Generic PLA
Notes:
Brim needed only around skids. I used Plast-Spaw blue filament with 215C hotend / 60C table. Increased speed for perimeters to 70mm/s. Also set please: 3 perimeters and 5 top layers as well as 4 bottom layers.
Post-Printing
1.Remove strings
There is quite possible to find many strings around handrail pillars and skid pillars. Remove these with scalpel/heat gun/flame.
2.Glue
Also need to glue handrail and skids to the seat. Use any cyanoacrylate glue.
How I Designed This
Designed in FreeCAD