Replace handlebar for speed sled "Alpen Race" / Ersatzlenker für "Alpen Race" Schlitten
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The handlebar broke some years ago. My father-in-law fixed it with some cooper wire but it´s not sturdy enough. So I…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The handlebar broke some years ago. My father-in-law fixed it with some cooper wire but it´s not sturdy enough. So I tried to design a replacement.
I used PETG filament with extra carbon fiber. Infill with gyroid structure at 12-15%.
Dimensions are 210mm x 140mm x 66,5mm. The center hole is 22,5mm in diameter and 52mm deep.
First test seams to be a good stability.
There are two models. One is "massiv body" and the other one is "light weight".
Print Settings
Printer Brand:
Anycubic
Printer:
i3 Mega X
Yes
Supports:
No
0.25
Infill:
12-15%
- some sanding to smooth the edges and some bumps
- fine smoothing with a blow torch
Category: 3D Printing