Replace handlebar for speed sled "Alpen Race" / Ersatzlenker für "Alpen Race" Schlitten
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The handlebar broke some years ago. My father-in-law fixed it with some cooper wire but it´s not sturdy enough. So I…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The handlebar broke some years ago. My father-in-law fixed it with some cooper wire but it´s not sturdy enough. So I tried to design a replacement.
I used PETG filament with extra carbon fiber. Infill with gyroid structure at 12-15%.
Dimensions are 210mm x 140mm x 66,5mm. The center hole is 22,5mm in diameter and 52mm deep.
First test seams to be a good stability.
There are two models. One is "massiv body" and the other one is "light weight".
Print Settings
Printer Brand:
Anycubic
Printer:
i3 Mega X
Yes
Supports:
No
0.25
Infill:
12-15%
- some sanding to smooth the edges and some bumps
- fine smoothing with a blow torch
Category: 3D Printing