1 / 3
TapeStack TAPE SLED - The tape rack with PUSH-TO-PICK FUNction — zdjęcie 1
1 / 3

TapeStack TAPE SLED - The tape rack with PUSH-TO-PICK FUNction

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TapeStack TAPE SLED - The tape rack with PUSH-TO-PICK FUNction

Ocena
5 / 5
Polubienia
12
Pobrania
37
Wydruki
0
Wyświetlenia
158
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We created the TapeStack System for story cassettes and audio dramas to be stored appropriatly with a little fun factor, too.

It is made for common cassettes of the 1980s with size 109,5 x 69 x 17mm

If you are interested in all TapeStack parts click HERE. And there are more to come... 

About the TAPE SLED:

Maybe you have some loose tapes WITHOUT the original housing which means: JUST THE CASSETTE. If you want to store them in a TapeStack rack you can now do so.

Simply print this TAPE SLED once per cassette and put it in from above as shown on the pics. The sled has internal notches and pins to hold the tape tight and secure. Is does not fall off even when holding the sled upside down!

You can now slide-in the full sled into an empty box of your TapeStack creation and it will be stored dust-free, too.

If you want to get the tape back just use the PUSH-TO-PICK button and enjoy the mechanism!

Printing instructions:

Material: PLA
Layerheight: 0.2mm
Infill: 15%
Supports: No

Enjoy & Have fun and please post your makes, THX!

Tagi