Liczymy pasujące modele…
Easy and fast to print in one piece and if you want, also in four pieces without support. The details make it nice to look at. Different versions available if you want to scale or modify it. Intended to be used as a 1:10 scale model but…
This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…
This model of a europallet is modelled in 1:87. The dimentions are after standaard dismentions for a europallet just scaled down. You can scale it slicer if you need it in another model scale. The easiest way to print the model upside…
Europallet made for use with 1:87 H0 scale train modelling. I print these in Prusament Vanilla White and then paint and weather them. Printing upside down is the best orientation designed for Prusa Mk3s+ with 0.25 Nozzle !
Based on the Headband "Brasil V2", but with A4 format shield. Reduced size/volume of both headband and the lower reinforcement. See pix for comparison. Included two DXF for the A4 sheet as well - Portrait and Landscape. The 3D printed…
Because I liked the battery crates from https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of a lot but wished for a couple of modifications, I started redesigning them. My redesigne includes:…
Updated version of the table coaster for MMU2S or any other mutlicolor printer Layerhigh: 0.15mm Support: no need Material: PLA wood or what's in your shelter 😊
Europalette im Maßstab 1:10 als Tischuntersetzer euro pallet on a scale of 1:10 as a table coaster Print instructions -0.2mm Layerhöhe -kein Support notwendig -alle Materialien
These are models for europallet edges. These edges can be placed on europallets to create boxes. There are models of 1,2 and 3 segments high because that's what's most common. I printed them in wood pla with a 0,4mm nozzle, at a layer…
Europalette / Euro pallet Maßstab: 1:14,5 / Scale: 1:14.5
EPAL https://en.wikipedia.org/wiki/EUR-pallet
Coaster with Eintracht Frankfurt Logo and "Europacup in diesem Jahr!". Colorchange after 2mm layer in g-code. Printed in (Prusa) PLA black and white. Uploaded 2nd Coaster with “Europas Beste Mannschaft” Untersetzer mit Eintracht Frankfurt…
llavero conmemorativo de las 15 copas de europa con la frase "Como no te voy a querer"
This is a europalette for the Playmobil forklifter 4476 fitting on the container. The design has rounded edges (fillets) similar to the original design Original Design by Ludwig-Concerto (…
Originally published here: Europa with approximate topography scaled one in twenty million by tato_713 - Thingiverse This model was made with MATLAB r2016a with the map from the JPL Solar System Simulator. I'm not sure if this map is a…
If you want upgrade your Standard Edition to Deluxe Edition :) at least replace tokens with Meeple.
Stack of 10 europallets scaled down to 1:120 scale. This is a remix of the original model by The_Hunter. The pallets have been twisted and offset against each other so that the individual pallets stand out better. Printed with Phrozen…
If you want upgrade your Standard Edition to Deluxe Edition :) at least replace tokens with Meeple.
Eine Europalette im Kleinformat für auf denn Schreibtisch.
Similar to idea for Twilight Imperium Trophy i made also one for Europa Universalis Price of Power board game. EU is eaven bigger and longer that TI3 ;)
Small europallet model, useful for decoration
This is fixed, remeshed strap for RC3 mask. It enables wearing Europa V3 short version for wearers up to 60+cm of head circumference. Print time for single is about 13min. 0.4mm nozzle, 0.25 layer Noctuo PETG Medical. Presented 3mf file…
This a model of the recently launched Europa Clipper satellite. It has a stand to hold the model with text about the mission. The main part fits into the stand for easier printing, you may want to glue the parts together (mine holds up…
Just a remix to fit the Biohort Europe garden shed. After printing the original, i have realised that it does not fit for our Europe model (it seems to have a bigger pipe, so i had to scale X&Y a little to make it work for us. Connected…
I’ve seen that Solar System Lithophane Planet Lamp Collection by @FritzPeppone is lacking my favorite moon so I decided to add one. Moon is roughly 140mm so it’s compatible with Prusa mini and Bambu Lab A1 mini. BTW this model got M75x4…
Europaleta lista para imprimir. Incluye clavos para dar la simulación donde van estos clavos. También si tienes una impresora con AMS podrás darle variación de color entre la madera y los clavos.
I took apart the original CAD file at https://3dwarehouse.sketchup.com/model/c88ad4c8e71c545dd093c6657d887c6a/1973-Lotus-Europa-Twin-Cam-Special?hl=en and adjusted some stuff to make it printable and to enhance some of the features. Print…
A scale model of the famous "Ginnheimer Spargel" located at Frankfurt Germany. Total Height 336m
Hier eine kleine Spielfigur für das Brettspiel Europareise. / Here is a small game piece for the board game Europareise.
An insert I made for Europa Universalis Deluxe Edition to hold the leftover sleeved cards that don't fit back in the box. As a bonus it holds the extra dice addon. Can be printed as one part or as two separate parts with smaller printers.…
Clip in Cover for Cover Frame - Switch Range / Series "Europa" from KOPP (width 51mm / corner radius ~3mm) Category: Household
After I wanted to restart my chess carreer and assessed some missing pieces at my Mephisto Europa Chess Computer, I came up with the great idea to just print new pieces (what a surprise...). I found these lovely pieces and adapted them…
EPAL / EUR pallet scale 1:10 and 1:14
This rocket is consisted of a 2 part airframe, a nosecone, 4 fins, an H class rocket motor and 3d printed parts (engine block, engine tube, the electronics bay and a piston). The airframe is made of cardboard and the fins (plus the fin…
Model vytvořený přesně podle výkresu normované palety, snadné sesazení z dílů pro kvalitní tisk bez podpor. Autor publikovaného výkresu : WhiteTimberwolf – Vlastní dílo, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=10343729
I used the Europa design and remixed it to allow for elastic cord or Ninjaflex filament along with the other strap options already built into the design. I also removed the 2 center pins and placed one in the middle in order to enable a…
Create your own shelves in your Biohort Europa garden shed. Despite the hooks being 3D printed, it can withstand quite some load. I printed mine in ASA, avoid PLA if the shed is in the sun. Spacing between rails : 71.7 cm (there is some…
Kopp Europa 3-fach Abdeckrahmen – Ersatzteil (Arktis-Weiß) Das Problem Der originale Kopp Europa 3-fach Abdeckrahmen ist gebrochen oder gerissen? Im Handel wird er oft nur schwer als Einzelteil angeboten. Die Lösung Dieser 3D-gedruckte…
"Lockpin" for dethleffs habitation door lock' Gasket for the outside, best to print with TPU The lockpin can be printed with PLA If the lock pin is too tight, just use a sandpaper and sand it a little. There are 2 files, one with a inner…
the europasaurus might be the smallest sauropod and it is similar to its cousin the brachiosaurus and it lived in the upper jurassic period
A planter for being hinged at a Europalette. You can print with the bottom on top, just a question of bed adhesion. Print Settings Printer: e3d Toolchanger Rafts: No Supports: No Resolution: 250 Infill: 20 Filament brand: dasfilament…
Model/replica of the NASA Europa Clipper sticker
Design Concept This 3D printed model replicates the standard Euro pallet, featuring detailed slats and precision design to mimic the real object in miniature form. Use Ideal for enthusiasts of scale models or dollhouses, this Euro pallet…
This is an approximate replica of a dash vent on a 1970 Lotus Europa. The original vents were handed, but this design is just a straight slot. Instructions Printed at 0.25mm layer height. Category: Automotive
Haltewinkel um das Dach meines Gerätehauses mit 2cm XPS Platten zu dämmen. Gedruckt mit 4 Wandlinien und PETG.
This model is designed to be printed in TPU, however another model for printing with PETG is coming soon. This fits in the holes (see picture below) at the bottom of your Europa doors or windows to prevent insects from entering the house,…
Mould blank for lost PLA investment casting for the mast step / tabernacle of my Hunter 19 (Pre Europa) sailboat. Print a slice of the top part at 100% to test fit. Print at 103% to allow for aluminium shrinkage. Supports and brim on the…
Easily mount your Neuropace to a wall for storage using either 2 screws, Command strips or 3M tape. I made this for my wife and it has been very helpful.
This is a replacement part and a improvement on the Europa Bliss Water fountain knob. The knob on this water fountain broke with use then I took this oppotunity to improve the old one with 3d printing. Broken old one: Added features for…
Printable merch for Volt (might add more): - coin (size of EUR 1 coin) - emergency whistle
Originally published here: Europa Monolith scaled one in 500 thousand by tato_713 - Thingiverse This is a scaled model of one of the monolith of the Space Odyssey series, written by Arthur C. Clarke, which lays on the surface of the…
I remixed this can cooler because I loved it so much. For 330ml cans. -------------------- Ich habe diesen Getränkekühler geremixt weil ich diesen so toll Fand. Für Dosen 330ml.
The art of engineered design. Inspired by a combination of the . . . Clipper from the movie ' Europa Report ' and Discovery One from ' 2001 : A Space Odyssey'. A Mothership to carry a SpaceX Starship long distances. The 3D model is based…
Provinces model if you want to add next player :O or if you want to make your custom color.
Neuropace RNS Keyring. 0.12mm or 0.08mm layer heights recommended. Print on side with no supports. May need glue or a brim/raft to stick properly since the contact area is small.
A stand for the Othoback Vibrastone So that it can be used effectively on the soles of the feet. - PRINT IN TPU! If it's not printed in TPU/FLEX, then you can't fit the device in! 2 perimeters 10-15% infill There's a small version (that…
Outdoor EUR-pallet If you have some europallets based furniture in the garden or on your balcony, you know that rain, water, moisture will quickly collect at the feet of the palette. That is why europallets were invented, to protect the…
Europalette/EUR pallet sliding feet and corners. If you want your DIY furniture that is made out of a Europallet/EUR pallet to move around easily, use the feet, and to protect yourself from the sharp edges, use the corners. Each model is…
Předmětem projektu bylo vymodelovat a vytisknout učební pomůcky pro skladové operátory. Žáci vytvoří modely v měřítku podle skutečných rozměrů (např. palety, gitter boxy).
New version of EU trophy, this time its need to be printed in 3 parts.
white until 6.4mm orange until 6.8mm finish with black
Europallet made for use with 1:87 H0 scale train modelling. I print these in Prusament Vanilla White and then paint and weather them. Printing upside down is the best orientation designed for Prusa Mk3s+ with 0.25 Nozzle !
llavero conmemorativo de las 15 copas de europa con la frase "Como no te voy a querer"
white until 6.4mm orange until 6.8mm finish with black
Bring a piece of Frankfurt , one of Europe’s most iconic skylines, right to your shelf! This detailed 3D printable Europaturm (Europe Tower) is modeled at approximately 1:1450 scale and stands tall at 23 cm — a perfect display piece for…
This is the 3D printable version of the European league Award Trophy, recreated with precision and optimized for collectible production. Perfect for fans, collectors, and makers, this STL model is engineered for flawless printing and…
Take the trophy home, to school, to work, your clubhouse, or wherever. This prints upright and with no supports. You'll find the trophy itself as well as the little badge thingy that goes front and center. It's constructed at 250mm, so…
