1 / 2
Europa remix for 3 hole and cord attachment — zdjęcie 1
1 / 2

Europa remix for 3 hole and cord attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I used the Europa design and remixed it to allow for elastic cord or Ninjaflex filament along with the other strap…

Ocena
0 / 5
Polubienia
0
Pobrania
37
Wydruki
0
Wyświetlenia
392
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I used the Europa design and remixed it to allow for elastic cord or Ninjaflex filament along with the other strap options already built into the design. I also removed the 2 center pins and placed one in the middle in order to enable a 3-hold punch design to allow for acetate sheets to be quickly adapted to the frame.

I have not included a bottom piece as there have been several very effective designs uploaded already.

Print instructions

My print bed size allows to fit only one of these at a time.

Settings:

PLA - 90mm/s
Infill-None
Supports-None

Time to print - 1 hour 8 minutes

Tagi