1 / 3
TapeStack TAPE SLED - The tape rack with PUSH-TO-PICK FUNction — image 1
1 / 3

TapeStack TAPE SLED - The tape rack with PUSH-TO-PICK FUNction

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

TapeStack TAPE SLED - The tape rack with PUSH-TO-PICK FUNction

Rating
5 / 5
Likes
12
Downloads
37
Makes
0
Views
158
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

We created the TapeStack System for story cassettes and audio dramas to be stored appropriatly with a little fun factor, too.

It is made for common cassettes of the 1980s with size 109,5 x 69 x 17mm

If you are interested in all TapeStack parts click HERE. And there are more to come... 

About the TAPE SLED:

Maybe you have some loose tapes WITHOUT the original housing which means: JUST THE CASSETTE. If you want to store them in a TapeStack rack you can now do so.

Simply print this TAPE SLED once per cassette and put it in from above as shown on the pics. The sled has internal notches and pins to hold the tape tight and secure. Is does not fall off even when holding the sled upside down!

You can now slide-in the full sled into an empty box of your TapeStack creation and it will be stored dust-free, too.

If you want to get the tape back just use the PUSH-TO-PICK button and enjoy the mechanism!

Printing instructions:

Material: PLA
Layerheight: 0.2mm
Infill: 15%
Supports: No

Enjoy & Have fun and please post your makes, THX!

Tags