HTD 15mm Wide Belt Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A belt tensioner with two idlers that clamps over the belt. Great for when you can't mount an Ider pully.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
A belt tensioner with two idlers that clamps over the belt. Great for when you can't mount an Ider pully. Is adjustable from about 2" all the way to the belts touching. uses 1.125" OD hex bearings mounted to Churro Hex Shaft. The thick spacer goes between the bearings and the thin ones goes between the bearing and the plates to the bearings don't rub.
I recommend printing in a durable material with 2-4 perimeters and higher infill. I chose PETG-CF with four walls and 30% infill.
Purchased Parts List:
- 4x - FR8ZZ-HexHD hex bearings.
- 4x - ¼" washers
- 4x - ¼-20 ½" long screws. (head style does not matter)
- 2x - Churo Hex Shaft cut to 0.86" (slightly longer is fine). Tap the ends for ¼-20.