Zero Deflection Stop Block for T-Track Fences
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A customizable, zero deflection stop block for t-track fences.
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 903
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- BSD License
This is a parametric/customizable stop block for t-track fences. The presets are for Kreg Trak, which accepts ¼" bolts and is 2-5/8" (66mm) tall and 1-3/8" (35mm) wide.
The knobs are sized with very tight tolerances so that the nuts can be press fit into them. A mallet can be used to tap the nuts into the socket, or they can be pulled in with a ¼" bolt.
I prefer to print tools with 3 perimeters and 50% infill, but standard print settings are likely to work just as well.
Hardware Needed:
- 3x ¼" hex bolts (minimum ¾" length)
- 3x ¼" hex nuts
- 3x ¼" washers (optional)
This model is parametric and can be customized with the OpenSCAD customizer for your fence.
