One Uppåtvind, please
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to add IKEA's cheap EPA12 filter element to the Prusa CORE One's exhaust fans
- Ocena
- 5 / 5
- Polubienia
- 699
- Pobrania
- 739
- Wydruki
- 10
- Wyświetlenia
- 49 802
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Uppåtvind filter holder for the CORE One, as briefly seen in my review video.
The unsplit file just barely doesn't fit on the One's bed (unless printed standing on edge, which is not advisable), so I quickly mashed up a split version that can be glued together with e.g. CA glue. Try to make sure the seam is sealed along the entire length.
Use a self-adhesive gasket material of your choice in the marked area on the back to seal the holder against the printer's case.
Attaches with 4 M3x10 screws (or longer).
Changelog
2025-02-11 Rotated stls for printing