1 / 3
Lead Screw Cleaner v1.1 - 3-Piece Design for Easier Cleaning — zdjęcie 1
1 / 3

Lead Screw Cleaner v1.1 - 3-Piece Design for Easier Cleaning

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for the common T8, 2mm Pitch, 4-Start, 8mm Lead specification used on many 3D printers.

Ocena
5 / 5
Polubienia
10
Pobrania
62
Wydruki
2
Wyświetlenia
365
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

There are some nice designs for lead screw cleaning, and I wanted to make one where it could be disassembled for easier cleaning of the tool, itself.

The notch on the ring is to identify which side has the fillet on the inner edge - the fillet makes it easier to slide the ring over the two halves.

Take care when cleaning tool is at the highest or lowest travel of the lead screw, if the tool is engaged (particularly at the top on the Bambu X1) it can push the bearing out of its socket if the lead screw is powered for traversal, which is necessary in many cases.

Print settings I used:

0.4mm nozzle

0.12mm Layer height (wouldn't go much higher for best fit-to-screw)

No support needed

Tagi