1 / 3
Lead Screw Cleaner v1.1 - 3-Piece Design for Easier Cleaning — image 1
1 / 3

Lead Screw Cleaner v1.1 - 3-Piece Design for Easier Cleaning

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed for the common T8, 2mm Pitch, 4-Start, 8mm Lead specification used on many 3D printers.

Rating
5 / 5
Likes
10
Downloads
58
Makes
2
Views
358
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

There are some nice designs for lead screw cleaning, and I wanted to make one where it could be disassembled for easier cleaning of the tool, itself.

The notch on the ring is to identify which side has the fillet on the inner edge - the fillet makes it easier to slide the ring over the two halves.

Take care when cleaning tool is at the highest or lowest travel of the lead screw, if the tool is engaged (particularly at the top on the Bambu X1) it can push the bearing out of its socket if the lead screw is powered for traversal, which is necessary in many cases.

Print settings I used:

0.4mm nozzle

0.12mm Layer height (wouldn't go much higher for best fit-to-screw)

No support needed

Tags