Counting matching models…
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
Cylindrical container - height 10 cm Cylindrical container of height 10 cm with screw cap. It is ok to print it in PLA.
Cylindrical container - height 6 cm Cylindrical container of height 6 cm with screw cap. It is ok to print it in PLA.
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
German: (English below) Dieses Modell ist ein praktischer Helfer zur präzisen Überprüfung der Estrichhöhe in einem Raum mithilfe eines Lasers. Der kleine Turm dient als Fixpunkt, um die korrekte Höhe des Estrichs an verschiedenen Stellen…
The inner diameter is 8mm and has a depth of 6mm.
Improved version: more solid and customizable. This elegant candle holder is designed so that you can print it in various colors or materials and choose between 3 different heights, always maintaining the same base. The internal diameter…
Improved version: more solid and customizable. This candle holder is designed so you can print it in various colors or materials and choose from 3 different heights. Or exchange it with the round candle holders that you can find in my…
Why When determining the maximum flowrate for a specific hotend/filament combination I always use the poop method , in which blobs of filament are extruded and weighted to assess the capabilities of the setup tested, but this time I…
This is a collection of zero height gridfinity refined bins. bins without walls (and floors - see note). They make for nice flat filling. they make for easy widget making (build stuff on top - I included solidworks files since there…
This is a top hat for a Voron Trident 300 that I'm calling an Ascot because of the jaunty angle ;-) . This gives extra height for an umbilical setup in the rear yet allows a complete unobstructed view into the chamber while standing in…
Higher legs to IKEA SONGESAND bed. Thanks to the higher legs, Castorama boxes fit perfectly under the bed.
Mode vase flower with stem - Fleur Stem can be found at : https://www.printables.com/model/1000035-stem-for-vase-flower Vase can be found at : https://www.printables.com/model/1295609-vase-with-flat-base-2-variants-and-dervish-spiral
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm) I created this bowl holder because our old cat doesn't have many teeth left, and when he licks kibble and food from his bowl, there used to be a mess around the feeding…
I created, the lever for the height adjustment. If you want to change something, just use the Fusion file.
The model can be scaled in your slicer to perfectly match the height and length you need for your specific door. The wide contact surface ensures stability without damaging the floor. For best results, print it on a smooth build plate…
This is a ramp for launching a marble horizontally off a counter. It is intended for a lesson that uses conservation of energy and projectile motion. It includes height markings and "backstops" to give the marble a pre-determined starting…
Elegoo Centauri Carbon LED light at nozzle height I wanted light at nozzle height that would not be obscured by the print head. Electrical work on the printer is at your own risk! I accept no responsibility for damage! I believe I have…
Hier eine einfache Gravitraxsäule. Diverse Höhen und es können Bahnen in eine Richtung durch die Säule gebaut werden Höhe in Fusion360 anpassbar mit der ersten Extrusion (Gewünschte Höhe abzüglich 5mm) und dann nicht vergessen, die Zahl…
The files has how many you need to print in its name, the CAD can help with assembly. You can fasten it with anything that works I suggest using M4 bolts. There are 2 configurations depending on preference; one uses 2 140mm fans and 1…
Files included here are two different height units. one small and one tall depending on what you need. Whichever you choose, it goes under the kettles base to lift the whole kettle higher and increase the clearance between the…
This model is designed to print without supports, print with the big circle side down. It is there for placing a level, or a phone with a level app if you're lazy like me.
About This is a customizable / generic solar radiation shield for temperature sensors. By printing one roof and however many 15mm tall main body pieces are needed you can hold whatever height sensor you need. Instead of being specific to…
Printed on a Tevo Tarantula 0.4mm Nozzle, 0.2mm Layer height
Add a warm and romantic touch to your desk with this tree stump pen holder, featuring a heart carved on the front. A simple but eye-catching design, perfect as a gift for Valentine’s Day, anniversaries, or for anyone who loves cozy…
This is a simple extension for your roll-up label holder. It can be adjusted to four different heights, making it more space-saving. You just need 2x M4 head screws with a length of at least 40mm. And 2x M4 nuts. Use supports only for the…
The HBADA E3 Pro Office / Gaming chair is known for his excessive height of the 6D-armrest. With the standard armrest, it's impossible to have a comfortable seat height and still be able to move closer to the desk with the armrests being…
Height spacer for the Kenwood kMix stand mixer serie. Used to adjust the bowl height to compensate for tools that can't be directly adjusted - like the modern dough hook design. Available in increments of .5 mm from 0.5 mm to 3.0 mm. Can…
This is an amazing box, its really well on my P1S plate and its a no fuss really easy to print and put together option for basic gridfinity. i don't need all the bells and whistles, i just want something that works.
These compact desk stands are designed to raise your soundbar by 35 mm , for example to clear the feet of a monitor stand or other obstacles on your desk. They fit soundbars with a maximum width of 62 mm and help improve placement without…
Compatible with Gravitrax and Gravitrax Pro, this height stone allows for enhanced play when parts are missing. Check out my other models. kopatybilny z zestawami gravitrax i gravitrax pro dodatkowy element rozbudowujący
Modified face plate model only, the rest is the same as original upload
My very first attempt at remix. i wanted a rounded one for the thermometer (also seen in the picture) I first made the ‘4’ high one and later the smaller ones.
Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…
UK Double socket desk clamp with 20mm extension in height for clearing wires for mains plugs
I remixed this model because we have a metallic door frame and I thought it would be cool, if the orignal model has a magnet. I added just a hole for a 6x2 magnet. Furthermore, I recommend glueing the magnet inside the hole. Original…
This is a fresh take on the modern planter, featuring a sharp honeycomb (hexagon) texture. The geometric pattern catches light beautifully and fits perfectly with modern or tech-focused interior decor. Just like my Knurled collection,…
A 3D printable bearing that spins well (0.3mm clearance between two races). No ball bearings needed. Feel free to use lubricant to improve longevity! Note: Second Image = V2 (races won't come apart); Third Image = V1 (races WILL come apart)
Simple, stable pedestal stand designed for the Amazon Echo Dot Max . These stands elevate the Echo Dot Max to improve sound projection and visibility while keeping your desk or shelf setup clean and organized. Four height options are…
This project allows you to convert standard cereal storage containers into practical filament dryboxes. The printed side mounts are screwed togheter through the container wall and support a Ø20 mm axle, allowing the filament spool to…
Simple, stable pedestal stand designed for the Amazon Echo Pop . These stands elevate the Echo Pop to improve sound projection and visibility while keeping your desk or shelf setup clean and organized. Four height options are included so…
My earlier trays https://www.printables.com/model/1020571-variety-of-round-trays-50-100-mm-dia-10-40mm-heigh had closed and flat bottoms. Placed next to the kitchen sink there is always water between the tray and the sink top or inside…
Extended Legs for Generic Laptop Height Riser This is a replacement lower leg for a generic laptop stand, designed to raise the laptop screen higher so it aligns better with an external monitor. This is a simple upgrade that can…
I found that the shuttle and backplate weren't mating properly once I added the pins and bushings, I reduced the height
This is a cover for the wall mounts commonly found on older Ikea cabinets to the likes of PAX, METOD, KALLAX and KNOXHULT. If you use beefier screws these covers often won't be able to go all the way back, thats why I also increased the…
3 heights of Tilt Feet to angle the keyboard. Its like a vertikal mouse but for keyboards. Your fingers wont hurt while gaming. The image are the 24mm ones :)
Fits AXP90-X53 Full + Fractal Ridge perfectly.
This spacer was designed to fix a common issue with glass shower doors that use a self-closing pin mechanism with a plastic cam component. Over time or due to installation tolerances, the glass door may sit slightly lower and start…
I wanted to gain space in my desk by removing the bulky original monitor stand. There was no available 3d printable solution for this that would allow me to fully control height, rotation and tilt of the monitor, so I decided to design my…
Picking the right layer height makes or breaks your prints. Here is a quick guide to choosing the best layer height for every situation. **What Layer Height Does** Layer height controls how thick each printed layer is. Thinner layers…
Fit is a little bit tight, but it works well enough for our purposes. Print Settings: Material: PETG Printer: Prusa Core One Nozzle: 0.4 Standard Infill: 60%, Gyroid Perimeters: 8 Layer Height: 0.12 Speed: Perimeters: 80mm/s Small…
I needed a way to keep my printer enclosure door firmly pressed against the foam padding around the opening to prevent fumes from printing (especially ABS) from escaping. This can be mounted with double sided tape, or 3M Command Strips,…
To help it not splash, reusing the original drop tray cover plate. Recommended to print in PETG or ABS or something else High temperature. Modelled by a Human in Autodesk Fusion
The IKEA TJUSIG shoe rack's compartments are too low for tall shoes like boots or high-tops. This modification part raises the shelf height, giving tall footwear the clearance it needs — a simple upgrade that makes the rack work for your…
Tool for Dräger PSS AirBoss height adjustment A practical tool for quick and easy height adjustment of the Dräger PSS AirBoss carrying system. This tool is designed to simplify the removal of the locking levers used for height adjustment…
A simple, stable VESA monitor stand that’s rotatable , extendable , and height adjustable . Tested stable with up to a 32" monitor . Print info: easy print, ~ 330g total Recommended: 0.28mm layer height, 3 walls , 20% infill Parts…
Height map of the British Isles made from a greyscale height image from https://tangrams.github.io/heightmapper/ . Model is 60mm x 80mm. To avoid supports I printed at a 15 deg angle, my other parameters were: 0.2mm layer height(scaled to…
Take quick and accurate measurements of your saddle position so you can "copy" the position over to a new bike. I have included 3 different widths depending on which biomechanical reference point width you wish to use (70, 75, or 80 mm).…
K1 Variable Height Mount (Remix of anavrin72) This is a remix of the excellent model by anavrin72 , updated with several quality-of-life improvements and better adjustability for the K1 platform. Key Changes: Relocated Mounting Point:…
Schachtel mit Deckel. Abmessungen: Länge 190mm, Breite 100mm, Höhen von 30mm bis 120mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Dimensions: length 190mm, width 100mm, heights from 30mm to 120mm. Printed with…
Schachtel mit Deckel. Abmessungen: Länge 180mm, Breite 100mm, Höhen von 30mm bis 120mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Dimensions: length 180mm, width 100mm, heights from 30mm to 120mm. Printed with…
Keychain inspired by the iconic character Link from The Legend of Zelda , designed in a 2.5D relief style based on an image extrusion. This model is optimized for multi-color FDM printing without complex manual work. Each color is…
Adjustable Height Grow Light Stand Quick and easy but not pretty. I whipped up this model because I had some grow lights, but no way to suspend them over my seedlings prior to planting in the garden. I consider this a "version 1" and will…
Original container is optimized for 0,2 mm layer height. This is remix is shorter - 70 mm. Use cap from original model. On MKS3+ take print from HIPS 2h on 0,3 mm. ( 3h on 0,2 mm) Enjoy.
Parametric MTG draft pack holder with optional staggered heights
These stackable height spacers allow you to raise your GraviTrax Junior tracks to different levels. The set includes spacers with heights from 10 mm to 100 mm , making it easy to create ramps, bridges and multi-level marble runs. All…
Hola colegas , les comparto este proyecto , la idea principal fue desarrollar un transporte seguro de insumos médicos para trasladar en áreas de difícil acceso como en guerras o desastres , empacas por ejemplo a ampolleta de cristal o…
The ramps that came with the Edifier M60 speakers are a bit too tall to fit under my monitor the way I'd like, so I designed some that are a bit shorter. It's a roughly 11.5 degree ramp that lifts the front of the speaker about 32mm.…
In der Modeldatei sind alle Bauteile hinterlegt. Nicht geänderte Dateien müssen noch vom Originalautor herunter geladen werden. Der Bumper für die Kette und die Ventilschieber, für die Seite und für vorne, sind auf Grund der Größe…
This is designed to vertically hold a caliper on to the lens assembly of a Boss brand laser, so you can measure the distance from the lens to the bed. By measuring that distance in different locations you can see whether or not your bed…
All the instructions for the original Modular Expandable Filament Storage Rack (1/2" EMT bars) are still valid. When I have time I will add them here and updated them to reflect the changes. Major changes: Legs are in 25mm increments from…
Dual-height brake lever extension for the stock Yamaha Tenere 700 foot brake. Adds a second contact point so you can adjust braking position for seated or standing riding, improving control and comfort. Designed as a simple bolt-on…
This is a remix of the Filament swatch Organizer from the user Polar it is for the HangableFilament Swatches by masukomi. The model is easy to print with any standard profile at 0.2mm layer height with a 0.4mm nozzle. I've used three…
Meant to replace the full-height bracket I received to fit an SFF PC. My pc is the Dell 5060 SFF Re-Uses the Screws my Perc came with. Major diameter of 2.8mm minor diameter of 2.0mm
Some handy boxes, conveniently split up per height. For other heights , have a look at : 10mm - https://www.printables.com/model/202486 20mm - https://www.printables.com/model/202483 30mm - https://www.printables.com/model/202469 50mm -…
Some handy boxes, conveniently split up per height. For other heights , have a look at : 10mm - https://www.printables.com/model/202486 20mm - https://www.printables.com/model/202483 30mm - https://www.printables.com/model/202469 40mm -…
Stackable Insertbox 1x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
This is a collection of stackable boxes, compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…
Update - Reinforced the base so there is less chance of it snapping when you pull legs with rubber feet in and out while moving your laser. Decided to create some leg holders for my Phecda laser. These feet/mounts are screwed to waste…
In Fusion360, specify your wished slot height (width of the tube + tolerance) in the “wished_slot_height” parameter and the model will adjust to your needs. The minimal height is 13mm and it is automatically enforced. This model…
This design allows for an adjustable low profile floating dust shoe, which is intended for use with the OpenBuild Cnc's. FreeCad files have been provide to allow you to make modifications for additional dust collector options or to…
3 bin Gridfinity holder, I have included one holder with a flat bottom, and one with one bin with a raised floor to specifically hold toothpicks at about the same level as standard qtips as seen in the cover photo.
The idea of this model was to reduce the amount of material to a minimum. Tower height 140mm and 24 gramm of filament. Easy to print. No support structure needed. Sand clock design.
i made this and i figured out the the legs I printed did not stick very well so for the side adjustable things I used some balsa wood that I had laying around I also used balsa wood for the top to make it more smooth but other than that…
Half-height beer crate style containers for CR2032 and CR2477 coin cell batteries. Can be used separately or stacked after gluing the stacking piece to the bottom. The CR2032 container can fit 28 batteries while the other one should fit…
This is a PRINCORE DRYER D-300 Height Extension. I made it to prevent the D-300 from getting wet feet in case of any water, as it stands in the basement and placed near the washing machine and the heating systems…
Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…
20+ Washers Why do I need these? It's simple. Maybe your washers are too small and slide right trough. Or you just want to use them as space holders, so you don't overthighten the bolt and crack the plastick. How do I ajust the height?…
1x1 bins split into 4 equal sections. Available in 20 different heights. With magnet holes. No top. Not stackable. Great for tiny or long narrow items such as cotton swabs, tooth picks, tweezers, brushes, glue tube, pens, cutters,…
I designed this stand for the iMac 27" which raises the Mac by 22mm for a more ergonomical screen position. This may also work for other iMac models. Features: The open space can be used for an external hard drive with cable access. Front…
My mower's previous owner's dog chewed the height adjust knob so I wanted to make a replacement. It needs a bit of curve to it but I designed it flat so a little heat and a hammer help it go on. The tang it goes on is cupped and has a…
1x1 bins available in 20 different heights. With magnet holes. Not designed for stacking or covers. Easy print, no supports needed.
Parametric design made with fusion 360, in case you'd like to tweak it for a different model. Supports are required
Introduction Soon after the release of the KYZ HSW Display Stand , many requests were made for a height extension to increase the storage area. This adds two sizes of extensions: 7 hex extension for an 165mm height increase 9 hex…
The triple containers sit on top of the Milwaukee Packout 8 inch Half Height vertical Divider design or a single container can be used with a single ⅔ container.…
These are sorting trays that I use to keep an overview of the things I need to remove and then build up again
This little part will slide around the base of the pixel stand (the first gen) and give small phones the boost needed to line up charging coils. This has worked with iPhone Mini, iPhone SE and now the Pixel 9 Pro Fold. I included the STL…
![CREALITY K1 | K1C | K1SE - LID RISER V2 [now 65mm height] [Original by LEOTE]](https://media.printables.com/media/prints/54cf1abf-e01f-48de-8607-c7e01d896aa0/images/12763660_ecd14738-7bbe-4a15-8ce2-44ee762f57b5_a8aaaa2a-e350-4230-9304-761f5a4baebb/riser-5-img_20260425_203911.jpg)
![[ALCH] stackable modular boxes in 6 heights and 9 dimensions (169 variants!) (ModuBox)](https://media.printables.com/media/prints/480542/images/3928335_14b3996b-2bdf-4a15-b686-0b93b75cb299/img_0565.jpeg)
