Height Gauge and Setup Block (Metric and Imperial)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.45 – €0.55 net (excluding VAT)
For file: Height Gauge Ruler v24_0.2mm_PLA_MK3S_34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 33.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Height Gauge for tablesaw or router table. You can set the height of your blade and keep it consistent between setups.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 162
- Makes
- 2
- Views
- 951
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
You can use the height gauge to measure and keep track of your settings on any piece of equipment in your shop. Use the ruler in the center of the gauge to lock in a measurement and then setup all your equipment to match the height or distance from the fence. There are also setup blocks in Metric and Imperial on the sides of the gauge. The ruler in the middle has Metric measurements on the left and Imperial on the right. There are 4 8x3mm recesses for magnets in the bottom to keep your gauge locked in position. Makes and Comments appreciated. Happy Printing!
hardware needed: 1x M4x.7 x25mm socket head bolt
Optional: 4x 8x3mm magnets
Print the Ruler with ( vertical shells ) 1 perimeter to keep the debossed numbers clean.