Height Gauge and Setup Block (Metric and Imperial)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height Gauge for tablesaw or router table. You can set the height of your blade and keep it consistent between setups.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 161
- Wydruki
- 2
- Wyświetlenia
- 950
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
You can use the height gauge to measure and keep track of your settings on any piece of equipment in your shop. Use the ruler in the center of the gauge to lock in a measurement and then setup all your equipment to match the height or distance from the fence. There are also setup blocks in Metric and Imperial on the sides of the gauge. The ruler in the middle has Metric measurements on the left and Imperial on the right. There are 4 8x3mm recesses for magnets in the bottom to keep your gauge locked in position. Makes and Comments appreciated. Happy Printing!
hardware needed: 1x M4x.7 x25mm socket head bolt
Optional: 4x 8x3mm magnets
Print the Ruler with ( vertical shells ) 1 perimeter to keep the debossed numbers clean.