1 / 2
Creality K1 Adjustable Height Foot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable height foot for the K1 to help reduce wobble on an uneven surface.
- Rating
- 4.625 / 5
- Likes
- 228
- Downloads
- 1,129
- Makes
- 10
- Views
- 5,853
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My printer surface was not completely level and was causing my K1 to wobble more during a print.
After they were installed I adjusted the height of each foot so the printer sat solidly on the workbench. I then recalibrated the input shaper. While it hasn't completely eliminated the ringing it has reduced it along with the https://github.com/Guilouz/Creality-K1-and-K1-Max/wiki/Fix-issue-with-Input-Shaper fix.
My Printed Settings:
- Nozzle: .4
- Layer Height: .2
- Perimeter Walls: 3
- Infill
- 15% for Printer Foot Base
- 15% for Height Adjuster
- 100% for Foot Lock (You can try 15% but it snapped off in height adjuster on me)
- Supports
- Height Adjuster: none
- Printer Foot Base: build plate only
- Foot Lock: build plate only
- Before installing assemble each foot and work the threads loose.
- Let me know how the Foot Base fits. I modified it prior to uploading since the original I had to file a little to properly fit in the corner.
I also published it on Thingiverse: https://www.thingiverse.com/thing:6301334