1 / 2
Creality K1 Adjustable Height Foot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable height foot for the K1 to help reduce wobble on an uneven surface.
- Ocena
- 4,625 / 5
- Polubienia
- 228
- Pobrania
- 1129
- Wydruki
- 10
- Wyświetlenia
- 5853
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 10) (Komentarze: 22)Remiksy (2)Kolekcje (353)Powiązane
My printer surface was not completely level and was causing my K1 to wobble more during a print.
After they were installed I adjusted the height of each foot so the printer sat solidly on the workbench. I then recalibrated the input shaper. While it hasn't completely eliminated the ringing it has reduced it along with the https://github.com/Guilouz/Creality-K1-and-K1-Max/wiki/Fix-issue-with-Input-Shaper fix.
My Printed Settings:
- Nozzle: .4
- Layer Height: .2
- Perimeter Walls: 3
- Infill
- 15% for Printer Foot Base
- 15% for Height Adjuster
- 100% for Foot Lock (You can try 15% but it snapped off in height adjuster on me)
- Supports
- Height Adjuster: none
- Printer Foot Base: build plate only
- Foot Lock: build plate only
- Before installing assemble each foot and work the threads loose.
- Let me know how the Foot Base fits. I modified it prior to uploading since the original I had to file a little to properly fit in the corner.
I also published it on Thingiverse: https://www.thingiverse.com/thing:6301334