upgrading the Y-axis Neptune 3 pro - linear rail MGN9H
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
upgrading the Y-axis Neptune 3 pro - linear rail MGN9H
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This mod is for switching to linear guides MGN9H. The Y-axis can be used without updating the firmware. I hope you enjoy it, and please share your prints. Thanks
ATTENTION — the print tolerance is 0.1 mm.
If you only have one printer, please print out the parts before disassembling the printer :-).
Printed Details (Use PETG or better (don't switch to pla)):
attachment_to_aluminum_profile - 6 pc
support_mgn9h - 1 pc
support_mgn9h + stop - 1 pc
tensioner_top_1 - 1 pc
tensioner_top_2 - 1 pc
tensioner_bottom - 2 pc
Material: (personal advice - do not skimp on linear guides)
- linear guides with carriages MGN9H 300 mm long x - 2 pcs
- screw M3x6 - 16 pcs.
- screw M3x12 - 18 pcs.
- thermal thread insert M3x5 - 12 pcs.
- screw M3x8 - 8 pcs.
- screw M5x10 - 4 pcs.
- low nut M5 - 4 pcs.
- washer M5-0.8 mm - 4 pcs.
Use the printed tensioner_top_1 and tensioner_top_2 as guides for a 3 mm drill bit to drill through the base with a 3 mm drill bit.