Liczymy pasujące modele…
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
MGN9H An MGN9H is a compact linear‑motion carriage designed for a 9 mm‑wide MGN9 rail. The H‑block format is the longer, higher‑stiffness version, using recirculating steel ball bearings for smooth, low‑friction travel. It’s commonly used…
Stealth Press 1S – Arm for MGN9H Rail This is a remix of the arm part for the Stealth Press 1S heat set insert tool. The original design is made for an MGN12H carriage and rail. Since I had an MGN9H carriage with a 315 mm rail available,…
I recommend using ABS, ASA or at least PETG. You need to cut the tap which hits the endstop from the original mounting plate. Installing is also very simple. Screw the printed adaptor onto the linear carriage using m3 screws. Now bolt the…
Add a adjustable stock limit switch to the Y motor bracket You need 2x M3x5x4 heatinsert and 4x M3x12 screws+bolts to mount the Ender switch to the Y motor bracket/holder. The switch gets triggerd by the extrusion
Remix of SNASA's Minimalist Heat Insert Press — MGN9H 300mm Rail Version This is a remix of SNASA's Minimalist Heat Insert Press adapted to use a MGN9H linear rail instead of the original LML12B. I redesigned the arm block and carriage…
Had extra 300mm extrusions, put them to good use.
remixed RapidBurner X Carriage MGN9H for Micron and Pandoras Box to include a mount for Cartographer or Beacon probe
Print it with strong plastic, preferrably at least PETG but not with carbon or glass filler, Voron print settings. Use 3mm drillbit, I actually got it done with wood drillbit as the sharp tip helped to better hold the drill in place. Use…
A longer rail segment for the mgn9h priming block for the linear rail alchemist so I can attach the slug v5 pryangle foregrip.
This mod is a remix of the original MGN9C linear guide and carriage for the MGN9H linear carriage. There is an adjustment for better stability of the X-axis and the ability to adjust the tension of the X-axis belt. This mod does not…
For constructing/modding your Prusa mini+, utilize a pair of 9mm linear rails with an MGN9H carriage. Ensure the linear rails are cut to a length of 279mm for an ideal fit. Optionally, if you have access to a CNC or a laser cutter, you…
In my case in original design carriage placed too high and belts was not centered by profile. I remade carriage to fixing this. Material : PETG Print settings : 6 walls, 6 top and bottom, 50% cubic infill Updated: 18.04.2024 V2. Added…
Print as shown with 0.2mm layers and 15-20% infill. Needs: 10 x Heat set threaded inserts M3x5x4 8 x M3x20 SHCS 2 x M3x40 SHCS
This mod is for switching to linear guides MGN9H. The Y-axis can be used without updating the firmware. I hope you enjoy it, and please share your prints. Thanks ATTENTION — the print tolerance is 0.1 mm. If you only have one printer,…
Simple modification to use one 6mm linear rod instead of a threaded one. Using a 20mm LM6UU. There are no tolerances in the parts to allow snug fit. Checkout a similar mod for the Y axis Prusa Mini+ Y linear rails MGN9H by amd989 |…
This piece is used to add a limit to the MGN9H travel so that: 1. It looks better 2. The slider doesn't get out Extra hardware you need: 1x M3 8mm SHCS screw 1x roll in T-nut or 1x hammerhead T-nut
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
it is best to take the z-axis motor mounts from this model: https://www.printables.com/model/1127773-kobra-2-neo-dual-z-mode-screw it is best to take the toolhead AB from:…
Print with recommended EVA3 Settings, all spacings are adjusted so no changes to Endstops and other parts need to be made
Stealthburner mount for Ender 5 with CR-Touch and MGN9H rails. All mounting points remain in the same location as the original X carriage. STEP file included for adjust CR-Touch. You will also need some fasteners in addition to the…
This was made specifically for the Duender MGN9H version, but should work with any other front rail carriage. There are versions with and without heatset inserts. BOM 10 M3x8 4 M3x5 3 M3x18 2 M3x12 Optional: Original Cable Holder 4 M3…
To preserve the original distance between the profile and the head, the thickness of the vertical wall has been reduced. This adjustment allowed the lower wheel to remain on the eccentric axle. The wheel creates a preload on the MGN9H…
Inspired by Rat Rig V3, I modded my Ender NG with custom arms, VenderMech wobble fix, and a side-cut bed plate. Runs smo
I had a lot of issues trying to mount the Dragon Burner toolhead on the original Pandora Gantry X Carriage on my V0.2 because it expects the toolhead to sit flush to the carriage and leaves no room for wires. I could not find any good…
My solution for the thread inserts at the bottom being pulled out due to the heat weakening the material. One version for flat and hex nuts, you may need longer screws (M3x60). Works great with ABS-PC.
This is a redesign of the popular AfterBurner toolhead, specifically adapted for the Anycubic Kobra 2 printer. The key feature of this version is its use of stock Kobra 2 spare parts . The design incorporates the original feeder…
Dholzer's rendition was damn near perfect. I remixed it work with the MGN9H rail I wanted to install. This should work for ALL Ender 5 versions as they use the same carriage plate. Bcos of the smaller size there is now enough clearance…
Work In Progress - Not fully tested Couldn't afford to convert to Mercury One.1 straight away so came up with these parts to gradually upgrade on a budget without having to replace a bunch of parts along the way. Remixed the E34M1…
Work In Progress - Not fully tested Couldn't afford to convert to Mercury One.1 straight away so came up with these parts to gradually upgrade on a budget without having to replace a bunch of parts along the way. Remixed the E34M1…
This mods replaces the original toolhead setup with an MGN9H Linear Rail for increased stiffness and speeds. It also requires a Hotend with Dragon Style mounting (for example Pheatus Dragon Hotend), and a 5020 Fan like on the MK4S.…
⚠ PRINT VERTICALLY (on the side) — same orientation as the original model. Do not print flat! This is an improved remix of the MGN9/MGN12 block/carriage disassembly helper. It adds a rubber stopper feature at BOTH ends of the rail,…
⚠ PRINT VERTICALLY (on the side) — same orientation as the original model. Do not print flat! This is an improved remix of the MGN9/MGN12 block/carriage disassembly helper. It adds a rubber stopper feature at BOTH ends of the rail,…
What is this? This is a mod that allows you to use 20-tooth idlers instead of 16-tooth idlers (or flanged bearings) on your Duender. Maybe you have some leftover, maybe you just ordered the wrong ones like me :-D And it replaces the big…
MGN9H An MGN9H is a compact linear‑motion carriage designed for a 9 mm‑wide MGN9 rail. The H‑block format is the longer, higher‑stiffness version, using recirculating steel ball bearings for smooth, low‑friction travel. It’s commonly used…
This is a template for making a centered M3 hole in 2020 extrusion with MGN9H rails (Voron 2.4 and Trident). This type of hole is used in the mod to lubricate the rail slides, as link below:…
Stealth Press 1S – Arm for MGN9H Rail This is a remix of the arm part for the Stealth Press 1S heat set insert tool. The original design is made for an MGN12H carriage and rail. Since I had an MGN9H carriage with a 315 mm rail available,…
I recommend using ABS, ASA or at least PETG. You need to cut the tap which hits the endstop from the original mounting plate. Installing is also very simple. Screw the printed adaptor onto the linear carriage using m3 screws. Now bolt the…
Add a adjustable stock limit switch to the Y motor bracket You need 2x M3x5x4 heatinsert and 4x M3x12 screws+bolts to mount the Ender switch to the Y motor bracket/holder. The switch gets triggerd by the extrusion
Remix of SNASA's Minimalist Heat Insert Press — MGN9H 300mm Rail Version This is a remix of SNASA's Minimalist Heat Insert Press adapted to use a MGN9H linear rail instead of the original LML12B. I redesigned the arm block and carriage…
I recreated Ender 3 V3 SE X-Rail by pinedasauce that has fix and finer result, but it has needed a new GT2 belt to fit
Printed tool allowing to mount a mgn9h linear rail to a 4040 base 20 aluminum extrusion.
Had extra 300mm extrusions, put them to good use.
I see a lot of models on Aliexpress, but I can't find any printable version for the mgn9h linear rail. I just created myself. Step file included. Not sure about Eddy current for Biqu location; maybe need to use Beacom better. This is just…
A simple mod to allow for mgn9h rails on Z for the virtue, just make sure to use aligners with v-slot extrusion. Around 5mm of Z travel is lost with this mod, but it just means that I don't have to buy more linear rails.
Remix of Spyder's mod to fit a 200mm MGN9 linear rail for the Shrew EXPT edition. Also includes an alternate shroud. Also includes a M5 MGN9H pump. Spyder's remix has a MGN9C and that is compatible as well. Choose your pick.
I modified a lot of parts to fit my need like installing mgn9h railings and 623 bearings for my enderwire project. For the base i used voxelab aquila frame. Its the same as ender 3 v2 frame . Ender 3 pro have 2040 y axis frame. You need…
Print Settings Choose a filament that meets the temperature and strength needs of the adapter. I chose ASA GF . Infill: 40% Adaptive Cubic. This is not critical and is somewhat dependent on the application. It is recommended to use 100%…
Tested, works. This model in OnShape: https://cad.onshape.com/documents/f47b1f5799fc4aa126c08191/w/220add992cd39f0d2349727e/e/29f6c911c79aab91c8ee9936?renderMode=0&uiState=6a508047c2bd25dd666b51c1 No photos as it's inside the printer.
In order to top mount the mgn9h rail you need this adapter so the belt can pass under this adapter. Three M3 nut required to mount the rail to the adapter. Use T-nuts from the link below. Print with more walls than usual so no infill will…
Tool used to center MGN9H rail on a 20mm wide piece of aluminum extrusion while fastening it down as seen in the following video: In this video series follow along while I built a Voron Trident with new parts and modifications that I've…
This is an ender 3 Max linear rail mount for the x gantry. I used MGN9H and mount it on top for the bracket, I use the ender 3 v2 Top rails mod for the linear rail mount and bought a separate 400mm long MGN9H for the linear rails,
These are LHD and RHD carriage for Voron 0.1 for MGN9H set. I designed them while building my Double Dragon mod https://github.com/VoronDesign/Voron-0 https://github.com/zruncho3d/double-dragon
Created based on the models from this project created by u/ zruncho , from a suggestion I got by u/ computermedic78 for a cheaper alternative to metal rails. The original z sliders were designed for 1515 extrusions on a Voron v0.1 variant…
This design was a remix of the H2 Rail upgrade for Ender printer and Vortex Shroud system for H2V2 on SV01Pro All thanks to the excellent model of the H2 on Grabcad to make this change as well as the design of the Vortex from FLYN…
Modular Mounting Kit for a BiQu H2 on a MGN9H on a 2020 Extrusion Profile Parts Needed: 8x M3x6 Thread Inserts 3x M2x4 Thread Inserts 3x M2x4 screws 12x M3x8 flathead screws 2x M3x25 screws Printsettings: Layerhight: 0.2mm No Support…
this is only a test piece. print at your own risk. i have not tested this model yet. i ended up changing to a mgn12 when i was making this mod mid way but figured i would release it in its current form and get some feedback from the…
My corexy printer did not accept the model because my belts are outside the printer, I decided to redesign the model according to my machine.
- Added Microswitch Y endstop - Added passive endstop block - Changed belt fixation (close to how belts are fixed in MGN12 version) - Printability of holes & bridges (non-supported holes (3 MGN) are closed for one layer (0.2mm) which help…
You'll need some extra m3x8 bolts and nuts and some printable v slot nuts, ill like the ones i used if I find them. other than that, 300mm mgn9h rails and nothing other than the stock parts. You'll need 2 of the y adaptors. The z-axis…
I remixed the ivan5rov top_endstop for the mgn9h rail with heat inserts also for the endstop, because my screws did not hold enough in the original version. I recommend to print it on the side not as in my picture shown - flat on the…
My remix of a Adafruit's and thrutheframe's heatset insert press using MGN9H rails, GT2 20T belt and F695 bearings. There are several designs available out there, but I wanted one that I could build from what ever spare parts I had laying…
I decided to switch the X linear rail on my Voron 2.4 from an MGN12H to an MGN9H rail for mass savings. I remixed Chirpy's original MGN12H X Carriage model, and moved the carriage screw holes inward to match the MGN9H carriage hole…
I'm changing to a skeletonized gantry + mgn9h to make my Y axis lighter. I couldn't find a mgn9h mount so I made one.
This is a conversion for the Ender 3V2 to fit the Voron Stealthburner as a direct drive setup with the BL-Touch. BOM: Belt part: 4 x M3 heat insert 4 x M3x8 BHCS Bltouch part: 2 x M3 heat insert 2 x M3x6 BHCS Stealthburner part: 6 x M3…
This is a variation of the dragon/rapid burner mount originally buy chirpy2605 and further modded by OldGuyMeltsPlastic @OGMP_407277 . I've adjusted the belt path to be higher on the carriage widened the belt holes for easier belt…
I modified only the parts of the Stealth Press that interface with the rail to allow for the use of the MGN9H, rather than the MGN12H specified in the original design. The modified parts are direct replacements only for the parts that…
TruWrecks has updated this model so that you no longer have to cut the belts while having better clamping power! You can find his model here: https://www.printables.com/model/941344-dragon-burner-beacon-probe-mount-v2 Thanks for helping…
the default v-wheels made the laser hang crooked so i switched to cheap MGN9H 350mm rail and now it's level against the table
I've tried searching for a mount which would help me convert from POM wheels to linear rail for Y axis. Couldn't find any. I've made this for MGN9H block. You still need to drill 2 holes on the frame holding the hot bed, since stock holes…
This toolhead is designed to be lightweight, yet very rigid. It was kept very simple, the complete head including cooling duct, belt tensioners, endstop and SuperPINDA mount consists of only six parts. The top plate (aluminum), the bottom…
Adapted carriage that allows mounting your dragonburner on a pandora gantry MGN9H
Mod for mounting Dragonburner toolhead to vertical MGN9H linear rail and compatible with all Voron probe mounts. Spacer needs to be included for the voron printers. Print using Voron presets and tree support touching bed. Also need to…
This makes possible to use the VZ hybrid printhead with MGN9H and with the stock ender 6 X endstop. All assembly informations can be found at the original mod page:…
Hello! Here is my version of the VZ printed toolhead compatible with RatRig V-Core 3.1. As mentioned by @UjangKarnadi_294653 in his original post , please refer to vz printed printhead for assembly, print settings and belt clips. Top…
I have redesigned the center part of the voron tap R8 to fit older versions of the Voron 2.4 that worked with 2 MGN9H linear guides. The assembly is similar to the old carriage. The bottom guide support is the same as the original voron…
TruWrecks has updated this model so that you no longer have to cut the belts while having better clamping power! You can find his model here: https://www.printables.com/model/941302-dragon-burner-mgn9h-klicky-v2 Thanks for helping improve…
a remix to use mgn9 instead of the original model (mgn12)
This model may be useful as a stopper if you vertically expand voron2 Z-axis or add the extra top hat, otherwise you don't need such stopper. BOM: M3 x 8mm BHCS M3 T-nut
Same as Ben's original V3, just made it fit a MGN9H vs MGN9C
In order to top mount the mgn9h rail you need this adapter so the belt can pass under this adapter. Three M3 nut required to mount the rail to the adapter. Use T-nuts from the link below. Print with more walls than usual so no infill will…
This is an Ender 3 v2 linear rail mount for the x gantry. The linear rail is mounted on the top side of the profile bar. This mod allows you to use the same existing mounting plate which you used with wheels. So you would not have to…
I have upgraded my Ender 3 S1 to CoreXZ and used an MGN9H linear rail for the X-axis. I created a generic mount and an adaptor for a Voron Stealthburner toolhead. There is also an example of an inductive probe mount. I have provided the…
This is a remix of the Dragon Burner MGN9H Klicky mount to allow better belt routing for the bolts on the MGN9H rail mount.
You can use these parts this with this model https://www.printables.com/model/808502-heat-insert-press I had already printed out all the parts before realizing that the 150mm rail I had was not the one I needed for this press. Still, I…
Simple mount for Cloudray K series Laser head to a k40 with a MGN9H Linear Rail. Done as somewhat of a mashup of upgrades between the new head and this linear rail upgrade (of which the spacer is stolen from):…
