Voron TAP Dual MGN9H with Microswitch Endstopp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plus Microswitch Y endstop. Changed belt fixation. Printability.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 720
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- Added Microswitch Y endstop
- Added passive endstop block
- Changed belt fixation (close to how belts are fixed in MGN12 version)
- Printability of holes & bridges (non-supported holes (3 MGN) are closed for one layer (0.2mm) which help bridging)
Front & upper part is unchanged from the original Model (linked below on the page) and can be taken from there.
Can be added to a 1.4R1 Voron with as little changes as possible (e.g. passive endstop block is screwed in like the original endstop block)
Working flawlessly so far in my Voron since a few days.