template for hollow screw used for lubricating MGN9H rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
template for hollow screw used for lubricating
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a template for making a centered M3 hole in 2020 extrusion with MGN9H rails (Voron 2.4 and Trident).
This type of hole is used in the mod to lubricate the rail slides, as link below:
http://mods.vorondesign.com/details/NiwnWQOao4t2dfoCpq9Q
The template hole is 2.5mm. I recommend using a slightly larger drill bit and re-drilling the hole to ensure a tight fit in the template.
Make the hole with a drill bit smaller than the M3 thread and then tap the final thread using a M3 male thread.
Use a M3 x 25mm hollow screw (or M3x22mm) to lubrificate. (in the picture, I used a 25mm).
I also recommend using silicone tubing (3.2OD x 1.6ID) attached to the screw, as this facilitates the application of lubricant through the hole.
hollow screw - http://aliexpress.com/item/1005007822234267.html
silicon tubing 3.2OD x 1.6ID - http://aliexpress.com/item/1005003176927357.html