template for hollow screw used for lubricating MGN9H rails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
template for hollow screw used for lubricating
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a template for making a centered M3 hole in 2020 extrusion with MGN9H rails (Voron 2.4 and Trident).
This type of hole is used in the mod to lubricate the rail slides, as link below:
http://mods.vorondesign.com/details/NiwnWQOao4t2dfoCpq9Q
The template hole is 2.5mm. I recommend using a slightly larger drill bit and re-drilling the hole to ensure a tight fit in the template.
Make the hole with a drill bit smaller than the M3 thread and then tap the final thread using a M3 male thread.
Use a M3 x 25mm hollow screw (or M3x22mm) to lubrificate. (in the picture, I used a 25mm).
I also recommend using silicone tubing (3.2OD x 1.6ID) attached to the screw, as this facilitates the application of lubricant through the hole.
hollow screw - http://aliexpress.com/item/1005007822234267.html
silicon tubing 3.2OD x 1.6ID - http://aliexpress.com/item/1005003176927357.html
