Voron Tap Dual MGN9H Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron Tap for printers such as the 2.4r1 with dual mgn9h rail
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 1331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
this is only a test piece. print at your own risk. i have not tested this model yet. i ended up changing to a mgn12 when i was making this mod mid way but figured i would release it in its current form and get some feedback from the public for any changes that this model may need. it's not a clean or beautiful part, but after your feedback (would be very much appreciated) especially if the part fits correctly, snug or loose i can fix those issues & also clean it up a bit aesthetically and release it back into the wild. if it mounts correctly it's a win since it's hidden anyways but mostly looking for real world printers in the community that are out there to test it. thanks! again, print at your own risk! it's a untested part so please don't leave 1 star reviews, if you could leave a comment and i will update and release a fix. i'm just trying to help the voron community out as well & pay it forward :)
fyi you'll also need the x carriage pivot block for mgn9 that mounts the tap to the bottom rail. you can find this under superseded parts in git for voron 2. i'll make it easier and include the part as well.
https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Superceded_Parts/MGN9_X/x_carriage_pivot_block_MGN9.stl