Buddy3d Cam alternative Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for the Buddy3d Camera without the tilt and pan functionality (because not needed :-) Much less bulky
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 376
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted an enclosure for my Buddy3d Cam that isn't as bulky and I don't need the tilt and pan funcionality (if it could be used anyway).
This alternative Encolsure fits all componants exapt the Motors (even the microfone).
To screw the inside components in place I used the original screws form the Buddy 3d Cam, as they fit there purpuse as needed.
The SD-Card slot is coverd up by the AcraSwiss Mount wich is connected to the Back cover. I don't use an SD-Card.
A SD-Card can be fitted before screwing on the back if needed.
The Reset Button is hold in place by the ArcaSwiss plate as well, so the button can be put in place after the assambly of the internal componants.
(The wight pictures are from a prototype, but with all the correct messurements.)