BMW Airhead Under the tank Master Cylinder Brake Cable Adjustment Feeler Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BMW Airhead special tool required to set the appropriate front brake cable free play on under-tank Master Cylinders.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An alternative to the hard to find/source metal feeler gauge of ~1.2mm thickness that came with the under the tank front brake master cylinder and ATE disk brakes found on /6 and /7 BMW airhead bikes (approx. 1976-1979) prior to the switch to Brembo calipers and handlebar mounted master cylinders.
I printed this file in PETG on a Bambu X1C
Infill is up to you as it's a small part and doesn't need much to be functional, but 100% might make this part last longer especially if being thrown into an onboard toolbox. I recommend ironing of the top layer to hit the 1.2mm thickness required for the adjustment as close as possible.
I've created two versions:
- V1 Plain front and back
- V2 with text ("1.2mm") and a hole for a keychain.