BMW Airhead Under the tank Master Cylinder Brake Cable Adjustment Feeler Gauge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BMW Airhead special tool required to set the appropriate front brake cable free play on under-tank Master Cylinders.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 1
- Views
- 202
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An alternative to the hard to find/source metal feeler gauge of ~1.2mm thickness that came with the under the tank front brake master cylinder and ATE disk brakes found on /6 and /7 BMW airhead bikes (approx. 1976-1979) prior to the switch to Brembo calipers and handlebar mounted master cylinders.
I printed this file in PETG on a Bambu X1C
Infill is up to you as it's a small part and doesn't need much to be functional, but 100% might make this part last longer especially if being thrown into an onboard toolbox. I recommend ironing of the top layer to hit the 1.2mm thickness required for the adjustment as close as possible.
I've created two versions:
- V1 Plain front and back
- V2 with text ("1.2mm") and a hole for a keychain.