Gridfinity dense Revell paint holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3x2 Gridfinity bin holding 8 cans of Revell email paint. bins can be stacked on top of each other
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This 3x2 gridfinity bin can hold 8 cans of Revell email paints.
I was looking for a gridfinity bin for revell paints and eventually, I came across this:
https://www.printables.com/model/383487-gridfinity-revell-paint-and-glue-holder
after printing it I noticed a couple of shortcomings:
- Slots are too small - additional stickers with barcode and distributor info on my cans make paints fit very tightly.
- The slots are too close - cans are tilted a little bit.
- Regular Contacta glue is too big.
- The bin can't be stacked.
So, I decided to try to make my own, and here is the result. By sacrificing slot for glue and rearranging can slots, I fitted 8 of them. Thanks to the increased height, bins can now be stacked.
I made the model by generating a bin in OpenSCAD and then adding slots in Fusion360, so it's probably suboptimal, but It worked for me.