Liczymy pasujące modele…
My icing modelling tools were a mess before I made this. Now I can see all of my tools in my Gridfinity baking drawer, and this stacks too so I can keep multiple layers of modelling tools in a small space! As seen in this video:
just print it ;-) Add an additional Design with only 15 degree elevation.
Just a simple holder for those super cheap mini modelling files that are ubiquitous on eBay and Ali with a handle diameter no greater than 4mm. I hated the cheap plastic pouch, and was just forever leaving them sat out on the side so I…
Connection rails stolen from an older project of mine. They're known to work when printed in resin. Contact me with results of FDM (remember to print in highest accuracy possible with decent filament) and I might make a revision just for…
My icing modelling tools were a mess before I made this. Now I can see all of my tools in my Gridfinity baking drawer, and this stacks too so I can keep multiple layers of modelling tools in a small space! As seen in this video:
model of rotary table using a hoe and a sidewall made of prusa filament
A small model of a commonly-sold 5V relay block to use when laying out electronics bays and the like. Not really intended for printing, rather to use as a guide for mounting hole placement and height clearance etc. It's as accurate…
I designed these paint holders to store my paints on the pitched ceiling of my shed, but they'll work on a vertical wall too. They could be stuck to a wall, but they have countersunk screw holes for easy fixing. Covering most sizes of…
just print it ;-) Add an additional Design with only 15 degree elevation.
You can use this item to scrape debris off your printing boards.
The most recent (July 2023) iteration of the couplings used on my models. As close to NEM standards as can be achieved.
Cirle cutter for masking tape. Similar to DSpiae cutter PT-C, it has 3 main parts: Circle cutter (you can print only it if needed) Locator for cutting positioning ( need to cut transparent platstic and mark a tagret on it, Cross and…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
Just a simple holder for those super cheap mini modelling files that are ubiquitous on eBay and Ali with a handle diameter no greater than 4mm. I hated the cheap plastic pouch, and was just forever leaving them sat out on the side so I…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
Simple Heart-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm Cutout Width x height: Heart01: 24.48 mm x 22.21 mm Heart02: 19.26 mm x 17.50…
Simple Circle-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm Cutout Diameter x height: Circle01: 26.1 mm x 21 mm Circle02: 19.02 mm x 21…
Simple Square-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm // "handle": 15 mm Cutout Width x height: square01: 22.31 mm x 21 mm…
Simple star, puzzle pieces and moon-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability. Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm Cutout Width x height: Moon01: 21 mm x 25.57 mm…
Simple Diamond-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm Cutout Width x height: diamond01: 24.45 mm x 20 mm diamond02: 19.30 mm x 16…
Simple Hexagon-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm Cutout Width x height: hexagon01: 23.65 mm x 20.02 mm hexagon02: 18.19 mm x…
print with tree supports 0.2mm nozzle Printed in PLA 150mm's
Antibody Modelling Kit It is our immune system that keeps us from getting sick. Central to our immune response are proteins known as antibodies. These Y-shaped molecules are custom made by special cells in the body (B-cells) to bind to…
I used this store everything i need for model building from the Nippers, Tamiya cement, Mrhobby, Panel Line, and others things. This model is designed with Madworks Sponge Sandpaper for the sandpaper holder. I will include the STEP for…
A Magnetic Tool Storage System for the Tamiya branded High Quality Plastic Modelling Files: Tamiya #74058 16mm Flat Tamiya #74059 10mm Flat Tamiya #47069 6mm Flat Tamiya #47063 10mm Half-Round Tamiya #47070 6mm Round Requires 10 8x3mm…
Tiny clamp for modellers Two identical parts per clamp plus a length of rubber band. Clamp the parts together in a vice (just makes it easier to…) and tie a cut rubber band round the notches (as per the photo). A tiny drop of superglue…
3pdt guitar pedal footswitch I built this for use when 3d modelling guitar pedal enclosures. Note: not a working footswitch, just a dummy model for testing layout of enclosure. Scad file is included: use<3pdt_v1.scad> 3pdt(); Print…
dummy 1/4 inch panel mount open jack (non-functional) I built this for use when 3d modelling guitar pedal enclosures. Print instructions Category: Music Summary dummy 1/4 inch panel mount open jack (non-functional) I built this for use…
dummy DC Jack 2.1mm - for 3d modelling guitar pedal builds. This is one of the DC power jacks I got from Tayda: http://www.taydaelectronics.com/dc-power-jack-2-1mm-enclosed-frame-with-switch.html **************** If you download 💾 or…
Hi all Here I have something different from model parts but a small cyclone that fits my Ryobi One vacuum cleaner for sucking up the excess sprinkles from my train layout. So they can be re-used elsewhere. The jar adaptor is clued or…
First attempt at modelling a mouse. Want to make a functional one in the future.
Simple holder for two Tamiya Modelling Putty tools. It's built on a Gridfinity Refined base, which is based on Gridfinity by Zack Freedman . Check out all of my Gunpla Organizers here.
The original rubber band is too soft to work with and keeps slipping off. This one is printed from tpu. 31 mm length, 9 mm inner diameter .
T-slot 2020 Extrusion& V-slot 2020 Extrusion models. For test fitting your prototypes possibly other uses. I was making a few different things relating to Extrusion so figured I really should create some ACTUAL extrusion to help me design…
My goddaughter makes earrings that she sells at markets and online. It is a tedious process, as she cuts the clay shapes out one at a time. She asked for a set of cutters that could allow her to make them faster. These models are the…
Le fichier mf suffit Couches 20 mm Remplissage 100% mais moins doit pouvoir fonctionner Comptez 5 heures , oui c'est long le TPU
Use this for your design as you like, no more measuring with calipers.
I wanted to store my hobby tape on my Honeycomb Storage Wall. This one is for a 40mm tape and several thin tapes from Tamiya and other manufacturers. Easy to print. Check my other models for the Tamiya standard tape dispensers also shown…
