Crosman 2100B Air Rifle Moderator / Muzzle Brake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A barrel adapter to fit the Crosman 2100B Air Rifle, with baffles and end cap.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 869
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I liked the Moderator/Muzzle break from Dan, but the threads would snap off anytime I would pump my Crosman 2100B air rifle, so instead of just relying on the threaded part to hold a moderator on, I added a shrouded portion to snugly hold the moderator - This really supports everything well.
No more broken moderator adapters. I previously tried printing the mount in ABS, PETG, Carbon Fiber Nylon, Polymaker PC - they all broke in the same spot - at the base of the threads, and the threaded portion would still be threaded into the moderator.
To keep from needing supports, I decided to split the model as seen in one of the photos, then super-glued the parts together after lightly sanding the two faces. I also used the 3.4mm dowel rod to align the two parts (I had to lightly sand the dowel rod to get a good fit).
Something I did not do, but realized after gluing the two parts: screw the moderator onto the one half snug, then align the horizontal muzzle brake portion to be perpendicular to the wide notch that fits around the front sight.
I printed in Atomic black PLA, but you could also use PETG or ABS.
My original description:
- The barrel adapter is designed to be secured with a large zip-tie or hose clamp.
If you like my designs and want to send me a tip, you can do so via PayPal….. Thank you and enjoy the models I create.
Dan's description for his moderator/muzzle brake:
- This is an air rifle moderator / muzzle brake for .22 and .177 cal. Has ½ x 20 threads to thread on to the barrel.