TCRT5000 IR Reflectance Tri-Sensor Array
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small casing for three TCRT5000 IR Reflectance Sensors
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this model for a robotics competition because I needed a sensor array but only had individual sensors on hand. I then modeled a small enclosure for three equally spaced at 5mm.
When loading the file to your preferred slicer, you may receive a request to “repair” the model. This is due to a small extrusion at the base that allows the print to be printed at a small elevation with the help of supports. Do not repair the model, as this will rid it of that extrusion. It will print flush with the build plate, and the sensors won't have space to get in.
Once printing, wait until the print reaches 86% (around the 40-minute mark) and pause it just when it starts to bridge. Then, once paused, move the extruder (Z axis) up by 30mm. Now simply place the sensor modules in the slots, lower the Z axis 30mm and then resume the print.
(This was printed on an Ender 3 V1, the process may vary slightly from printer to printer.)