HexiBox Series: Trihexa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniature subwoofer based on the Tang Band W3-1876S driver.
- Ocena
- 5 / 5
- Polubienia
- 142
- Pobrania
- 749
- Wydruki
- 5
- Wyświetlenia
- 6696
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
As seen on X and YouTube:
Designed for use with three Tang Band W3-1876S 3" subwoofers. Suitable for corner-loaded output between 30-100Hz.
Tang Band W3-1876S 3" Subwoofer:
https://www.parts-express.com/--264-909
Hilitchi Binding Posts Terminals
https://www.amazon.com/gp/product/B07PFMD1N2/
M4 x D6 x L6 Threaded Inserts:
https://a.co/d/0w8jzpp
M4 Screws:
https://a.co/d/1DX5BYc
Subs wire in parallel.
Recommended printing settings:
PLA is okay; PETG is better.
At least 4 walls (perimeters) all the way around.
At least 50% gyroid infill. (Higher is better.)
Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.